Results 1 to 7 of 7

Thread: L250/250Ti Tweeter Bezel

  1. #1
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,975

    L250/250Ti Tweeter Bezel

    Can one of you guys who own a pair take a couple of measurements?? I am looking for diameter of the flat before the the taper to the baffle and the height of the top of that flat on the top and bottom from the cabinet face. I have loads of pictures but would rather get a good measurement.

    TIA Rob
    Attached Images Attached Images  
    Last edited by Robh3606; 08-29-2007 at 08:11 PM. Reason: Added picture

  2. #2
    Senior Member vettedrummer's Avatar
    Join Date
    Nov 2004
    Location
    Fraser, Michigan
    Posts
    199

    250Ti measurements

    I'd say it looks like 5/8" from the speaker tops to the start of the flair out. The flair out starts just as soon as the 1/4 round on the edge ends. The ring of wood around the tweeter is also 5/8". From the top of the frame of the midrange to the flair is 1 and 3/4". Hope this helps.

  3. #3
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,975
    Yes it did thanks!!! How about 2 more. I am looking for the bezel height off the baffle.

    Rob
    Attached Images Attached Images  

  4. #4
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,018
    I sent this to Rick a while back.
    Attached Images Attached Images  

  5. #5
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,975
    Great Thanks!!

    Rob

  6. #6
    Senior Member JBLnsince1959's Avatar
    Join Date
    Dec 2003
    Location
    KC - land of ahhhhs
    Posts
    1,795
    Quote Originally Posted by Titanium Dome View Post
    I sent this to Rick a while back.
    yes you did. His measurements and description was perfect and exactly what the doctor needed

    thanks again Doug

    BTW...what are you playing with now Rob?

  7. #7
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    7,975
    Can any of you L250ti Jubilee owners help me out?? It looks like the bezel on the Jubilee is a different size than a standard L250ti. I am staking rings to take a crack at the bezel but want to confim a couple of measurements. Using pixels in paint shop I come up with a 7/16 ring around the 050 tweeter.

    Are the heights of the bezel the same?? They are 1/8 and 13/16 for the standard version.

    Thanks Rob
    Attached Images Attached Images     

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. CF 150 tweeter blown
    By kvgs in forum Lansing Product Technical Help
    Replies: 9
    Last Post: 03-10-2007, 07:29 AM
  2. Lancer55 tweeter help
    By dino520 in forum Lansing Product General Information
    Replies: 22
    Last Post: 02-04-2007, 01:51 AM
  3. Tweeter to tweeter positioning.
    By alexkerhead in forum Lansing Product General Information
    Replies: 20
    Last Post: 10-10-2006, 12:20 AM
  4. Different Tweeter to Tweeter Question
    By Ducatista47 in forum Lansing Product General Information
    Replies: 0
    Last Post: 10-09-2006, 08:29 PM
  5. Crossovers for K2S9800 and/or S1M, tweeter over 1,5"driver
    By sebackman in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-16-2004, 01:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •