One ore two Sub's

[Brian DK]

Hi.
I have been looking at the Array 1500 sub, and it seems to only have
one line in??
Does that meen that you have to have 2 of them to work correct.?

Brian.

[Titanium Dome]

Not exactly sure what you mean, so I'll cover three possibilities.

1) The 1500 Array is meant to be daisy chained, thus one input and one output. By daisy chaining, you can hook up two, three, or four 1500 Arrays, according to the volume of the room you place them in. If you buy from a Synthesis dealer, he'll recommend how many, or you can figure it out yourself via the Harman International multi-subs white paper.

2) If your receiver or pre/pro has two sub outs (L and R), then you'll need an RCA Y adapter to merge the two into a single cable and run the single cable to the 1500 Array.

3) If your receiver or pre/pro has two sub outs, and you get two 1500 Arrays, then run one sub channel to each sub.

[Brian DK]

you covered it quite well.

I got my answer on you 2. and 3. respond.

Thanks.