Results 1 to 8 of 8

Thread: Refoam Heads Up..

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member soundboy's Avatar
    Join Date
    Mar 2004
    Location
    Oregon
    Posts
    211

    Refoam Heads Up..

    Not all foam surrounds are created equal...
    Just a heads up to anyone on here considering buying surrounds....
    USE RICK COBB...
    Why?
    I have a mint pair of 4301B's, that had new surrounds installed right before I purchased them. They did a good job, cosmetically, but one of the drivers had coil rub at higher input levels...
    So, I got a kit from Rick Cobb, on this site, and replaced the surround on the woofer, lining up the coil with the 30hz tone CD..
    That's when it was apparent that the new surround was MUCH softer and more pliable, and and when pushing on the woofers, the new one was much less stiff...
    It sounded completely different...MUCH more articulate, much deeper bass, and just all around smoother and more musical.
    I don't have the measuring tools, but no doubt the fs and damping are affected.
    So, all surround kits aren't created equal, and the ones from Rick sound great.
    Of course I replaced the other woofer surround, as well, and the same exact sonic differences were noted.
    The old surrounds were not old and stiff, they were about a year old....and I have had many JBL woofers over the years....the factory foam on both my 2245's is still pliable and softer, like Rick's, even after years of use.

    So, KUDOS to Rick, and a tip to use only his supplied surrounds...

    I have a notion that the ones on Ebay are thicker, stiffer, and may fit, but take away the inherent musical qualities of the these great woofers...


    Attached Images Attached Images  

  2. #2
    Senior Member
    Join Date
    Sep 2006
    Location
    San Jose
    Posts
    846
    Thanks for the tip. It's nice to know when someone has a good experience. So often people only report bad experiences. It's too bad there isn't some reference of surrounds one could refer to and purchase the one that they felt served their needs. Still, I have to believe that "the ones you get on ebay" takes in way too many to fit any one description. It's to bad a database hasn't been built. I wonder if there aren't santeprene surrounds out there close enough to fit some of the drivers I but have found no access to catalogue info on these things. Suppliers seem over vigilant to protect their dealers and re-coners don't see time spent going through this kind of stuff with a customer as particularly profitable. I don't begrudge the re-coner his profit but why should he be able to control all of the information.

    Also, seems like pricing should be more like auto parts. A garage charges much more for the part than you can buy it for. He has to. If the part fails he's out more than just the part. If his labor isn't just right (nobody is dead on every time) he may have to eat the part. You get the idea. I doubt that re-coning is so easy that if we could all easily by parts we would all be doing our own speakers and if a garage has to bail you out of your own repair it stings, a re-coner could do the same. A garage won't install your parts that you bring in or if they do there is a whole set of ground rules. A re-coner could do the same. Just an idea. They could introduce a lot more openness and user friendliness and still remain at least as profitable. The first to go that way might even become more profitable. Any profit you make on parts that just go across your counter pay you more per hour than if you install them.

  3. #3
    Senior Member soundboy's Avatar
    Join Date
    Mar 2004
    Location
    Oregon
    Posts
    211
    Just trying to help. I know the subject has been discussed ad nauseum on here before....but not the differences in surround pliability or thickness.
    I sure found out how good the little 4301's really sounded in the bass! I had heard some nice origonals before, but when I got mine, they seemed a little more hard and forward than I remembered....not any more.

    You are right about a blanket statement on the ebay surrounds...I am almost certain others may be getting the same surrounds as Rick Cobb....but how is one to know?

    Besides, Rick's are very inexpensive, and none of the kits on ebay include the very helpful CD alignment disc...
    who the hell would do it the old way, by removing and messing up the dust cap, when this tool works so well???

    I have only refoamed a half dozen woofers....but they all came out factory perfect....
    And, I might add, neater than a lot of the "factory authorized" jobs. Some of the dustcaps look like a caulking gun was used to apply the cement!

    Years ago, a factory guy made me pay $10 extra, to put the foam on the back side of the cone on a 2245H...because it was more difficult!

    No offense to the many many great refoamers/reconers out there. You are appreciated...

  4. #4
    RIP 2021 SEAWOLF97's Avatar
    Join Date
    Jan 2006
    Location
    in "managed decline"
    Posts
    10,054
    Quote Originally Posted by soundboy View Post
    I have only refoamed a half dozen woofers....but they all came out factory perfect....Years ago, a factory guy made me pay $10 extra, to put the foam on the back side of the cone on a 2245H...because it was more difficult! who the hell would do it the old way, by removing and messing up the dust cap
    I've had Infinity refoams where the gap is so tight that shimming was the only way , sometimes it has to be done "the old way"

    you've been busy , Pete.....when I first met you, you were a "refoam virgin"

    On the back harder ?? For me , on the front is harder.

    ( see my post about the Advents refoam where the outer edge of a reversed foam is glued on the underside of the step down adapter that Advent used for putting a 10in cone in a 12in basket)

    .................................................. .................................................. ...................

    I've never seen a foam with a manufacturers mark or name and my local refoam shop (JaMac)
    says they all come from Asia...anybody know any different ?
    Some kind of happiness is measured out in miles

  5. #5
    Senior Member soundboy's Avatar
    Join Date
    Mar 2004
    Location
    Oregon
    Posts
    211
    [QUOTE]
    Quote Originally Posted by SEAWOLF97 View Post
    you've been busy , Pete.....when I first met you, you were a "refoam virgin"
    It only takes overnight to remedy that situation a half dozen times



    .................................................. .................................................. ...................

  6. #6
    Senior Member
    Join Date
    Feb 2007
    Location
    Christchurch, NZ
    Posts
    1,400
    I have used some of Ricks product, and found the quality and ease of use to be very good. He also has other things like dustcaps and the like. I need to refoam some 117's and was dissapointed that he didnt have the kits for them in stock. I think I will wait until he has. Kudos to RC.

  7. #7
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Thom View Post
    Also, seems like pricing should be more like auto parts. A garage charges much more for the part than you can buy it for. He has to. If the part fails he's out more than just the part. If his labor isn't just right (nobody is dead on every time) he may have to eat the part. You get the idea. I doubt that re-coning is so easy that if we could all easily by parts we would all be doing our own speakers and if a garage has to bail you out of your own repair it stings, a re-coner could do the same. A garage won't install your parts that you bring in or if they do there is a whole set of ground rules. A re-coner could do the same. Just an idea. They could introduce a lot more openness and user friendliness and still remain at least as profitable. The first to go that way might even become more profitable. Any profit you make on parts that just go across your counter pay you more per hour than if you install them.
    Thom...
    that would be in a perfect world.

    I'd be glad to install a customer's supplied surround...and I have...but most of the time they were sent the wrong surround.

    Also...lots of business have protected dealer networks, and there is a reason for it....it's to try to maintain a higher level of quality... and if a part is defective from the factory, the authorized servicer can send it back for a replacement. In addition, there are factory trained procedures that should be followed.

    In regards to the aftermarket....there isn't much adherance to JBL's standards of performance. There isn't some industry oversight committee that guarantees your JBL to perform to factory standards of performance and cosmetics.

    The system surely isn't perfect, but as has been discussed many times in this forum....OEM parts are the best.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  8. #8
    Senior Member
    Join Date
    Sep 2006
    Location
    San Jose
    Posts
    846
    Quote Originally Posted by edgewound View Post
    Thom...
    that would be in a perfect world.

    I'd be glad to install a customer's supplied surround...and I have...but most of the time they were sent the wrong surround.

    Also...lots of business have protected dealer networks, and there is a reason for it....it's to try to maintain a higher level of quality... and if a part is defective from the factory, the authorized servicer can send it back for a replacement. In addition, there are factory trained procedures that should be followed.

    In regards to the aftermarket....there isn't much adherance to JBL's standards of performance. There isn't some industry oversight committee that guarantees your JBL to perform to factory standards of performance and cosmetics.

    The system surely isn't perfect, but as has been discussed many times in this forum....OEM parts are the best.
    I was looking for a system that would protect the re coners profits. This is important. Without that he won't be there when you need him. And at the same time give the do it yourself type some choices and flexibility. The exact factory parts are best if what you want is what your driver was when it was new.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Zappa in plush surround sound...
    By jblnut in forum General Audio Discussion
    Replies: 15
    Last Post: 08-12-2006, 12:39 AM
  2. JBL control 1 multi- surround array
    By JBL 4645 in forum Lansing Product DIY Forum
    Replies: 0
    Last Post: 06-09-2006, 02:17 PM
  3. JBL L90 in surround sound setup?
    By mtolesen in forum Lansing Product General Information
    Replies: 3
    Last Post: 04-29-2006, 11:18 AM
  4. JBL 2115 Surround & Dust Cap Replacements?
    By fizzicist in forum Lansing Product DIY Forum
    Replies: 2
    Last Post: 03-29-2006, 06:47 PM
  5. How to remove foam surround done wrongly?
    By ngccglp in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 10-27-2005, 07:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •