2226H with 2425J

[clubman]

I have a pair of both drivers layin around and would like to mate them together in one encloser. I have been runing them bi amplified using a DBX drive rack. My question is though I cant seem to find a passive crossover made for the 8 ohm 2226 and the 16 ohm 2425 horn. Could some modifications be made to a crossover that is a jbl model are could one be made from scratch. I am very good with schematics and soldering. Or am I just not looking hard enough. I would think that in some point in time they put a 16 ohm horn with a 8 ohm woofer. I beleave that the horns are from the cabiret series.

[Zilch]

http://www.jblproservice.com/pdf/Cab...ries/4691B.pdf

Here's a readable version:

http://www.jblproservice.com/pdf/Net...%20Network.pdf

It matters what horn you're using, as well....

[clubman]

Horn lens is the 2370A

[Zilch]

There's your start, then.

I have that running here, but I've never measured the response.

Party speakers. They'll play stupid loud:

[clubman]

Yep, thats the idea. 2 2240H's will be covering the low end. THanks for the help!

[Baron030]

Hi Clubman
Normally, you can get all the parts you will need from a source like www.PartsExpress.com.
But, in this case Parts Express does not carry the 0.75mH coils that you will need for your project.
As it turns out, Madisound carrys some solon 0.75mH 14ga air cores that should do the trick.
Here is the Link: www.madisound.com/catalog/index.php?cPath=356_20_31

Good luck with your project.
Baron030

[JBL 4645]

There's your start, then.

I have that running here, but I've never measured the response.

Party speakers. They'll play stupid loud:

“Stupid loud” nah, you mean Just Bloody Loud! I bet that glass window vibrates like nobody’s business. Why not use a tone and obsolete it till the window cracks.