Technical Ref Threads for 434x monitors

[porschedpm]

Excellent points, Ian, thanks!
Can you provide any links to the existing descriptions on the site so folks can get this info...

Here is a link to Ian's description on setting the LPad levels. This method uses an Spl meter and is the most accurate method of setting LPads. To quote Ian "....using this technique (is) the only reliable and repeatable method of adjusting the relative balance of the drivers on a 4 way system."

http://www.audioheritage.org/vbullet...25&postcount=7

[hjames]

EXCELLENT! Thanks very much - I knew I had seen it once, but there's so much stuff here sometimes its hard to tell the signal from the noise floor!

Here is a link to Ian's description on setting the LPad levels.
http://www.audioheritage.org/vbullet...25&postcount=7

[hjames]

Chart showing relative size and weight of 43xx Monitors
(chart corrections/updates courtesy of grumpy!)

[hjames]

Once again, because ya know it feels good!

4344 References Thread

4345 References Thread

4343 References Thread

4341 References Thread

4315 References Thread


Please - PM me your ideas and images to go there ... thanks!