Howdy All,
I am installing new surrounds on the 12" LF drivers on a pair of Altec Santana II's (got a very nice kit from Rick Cobb as found on these boards, excellent service, BTW!). I think I can handle the process but when I tried to remove the speakers from the cabinet, I found they are on there with a vengeance.
These speakers have machine screws, lightly secured as I read in the literature, so there must be a threaded fastener in the cabinet. It appears there are no additional clamps, however, I would rather not ruin the original gaskets (gray, medium softness, about 1/16" thick) between the frame and the cabinet if that is what is left holding them in place. Any suggestions/tips/tricks from the wizards on these boards?
KJH