2nd all connectors are XLR. the inputs are 1 male and 1 female per channel. No problem, purchased standard adapters for each , now have 4 input connections. They are labeled on the unit pin 1 "earth", 2 "-VE", 3 "+VE"
Outputs are 4 male XLR, nobody has heard of that and says they are proprietary. they are labeled pin 1 "-VE", 2 "0", 3 "+VE".
I would like to get all 4 outputs to 2 wires or 1 piece 2 connector banana plug to bi-wire the 250's
Something about shielding to ground doesn't match the XLR connectors in stock. They recommend buying buying plain connectors and making my own ends. they were out of stock. My question is can't I just solder wires to + - pins on the connectors to make 2 wire outputs on the plain connectors? I got confused at them talking about grounded shielding...even on the ones I make...
Thanks
Mark