Now I have a set of L250's and 250Ti's, I thought I would post some crossover photos. I have seen various photos on this forum but these will summarize them all in a single thread.
Rear shot for Dr Tinnitus to view.
Jeff
J/S-S1A
Jeff-S1A
Andy, years later, I want to thank you for posting these photos. Just this weekend from my uncle's estate I received one pair of L250Tis (I'm storing them for my cousin) and one pair of L250s (my cousins gave them to me).
I may recap the 250s eventually. Your photos give me a start. I can see the coils are a little different on the 250s versus the Tis, but I was wondering if the caps are all the same?
Also, do you have the schematic for the 250? I found only the one for the 250Ti.
Thanks again!
Done; thanks!
". . . as you have no doubt noticed, no one told the 4345 that it can't work correctly so it does anyway."—Greg Timbers
Following Phil's lead for the L250 schematic
http://www.jbl.com/resources/Brands/.../L250%20ts.pdf
here is the link for the 250ti schemo!
http://www.jbl.com/resources/Brands/...250ti%20ts.pdf
2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460
Missed these replies. Thanks so much!
Can't quite make out C3: Is that 4.0 or 40 uF?
Thanks, Junior!
Also, is R1 51 or 5.1 ohms? (I think it's 5.1 but it looks like 51.) Thanks!
You might pop on over to your other thread that has all the values listed.
OK, THAT's not embarrassing. Thanks, Jeff.
(Although on reflection, that was about the original L250, not the 250Ti. But I have the Ti XOs out now so I can just look at it, and I'm sure the information's in one of these threads --- I lose track.)
There are currently 1 users browsing this thread. (0 members and 1 guests)