Results 1 to 3 of 3

Thread: 3" metal dust caps for K110-questions

  1. #1
    Junior Member
    Join Date
    Apr 2007
    Location
    USA
    Posts
    3

    3" metal dust caps for K110-questions

    I am in need of metal dust caps to replace dented and smashed dust caps in four K110's recently purchased. In that regard I have two questions I cannot seem to answer in current posts, the Internet, JBL parts sellers, Ebay, etc. They are:

    1st-What is the exact size of the dust cap in a K110?

    2nd-Who might have 3" aluminum dust caps for sale?

    Any suggestions or advice is welcomed.

  2. #2
    RIP 2009
    Join Date
    Feb 2004
    Location
    Rohnert Park, CA
    Posts
    3,785
    Those domes are JBL part 48844 and list for $5.64 each. Your local JBL service center may be able to get them for you, though I'd recommend you also have them install the domes.

    John

  3. #3
    Senior Member SMKSoundPro's Avatar
    Join Date
    Apr 2005
    Location
    Anchorage, Alaska
    Posts
    1,019
    I have 1 dome for an E110, and agree with the earlier post to have a JBL reconer do the job. 2 domes come in a recone kit, sometimes, and possilbly a reconer has some spares available for you.

    If the dome is dimpled, a shop vac may suck it out. If badly smashed in, you will to also check the roundness of the of the voice coil. Sometimes a dome problem can turn into a recone job, quickly.

    Good luck! I use E110s also in my rig, and have reconed a few. I would like to make a couple into 2123 for 43xx monitor duty, but that's another thread!

    Scott.
    One step above: "Two Tin Cans and a String!"
    Longtime Alaskan Low-Fi Guy - E=MC² ±3db

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4343 crossover modifications
    By jeph in forum Lansing Product Technical Help
    Replies: 514
    Last Post: 07-25-2019, 08:36 PM
  2. D130 Dust Caps Paper vs. Metal - Ripple tears
    By Howe in forum Lansing Product General Information
    Replies: 8
    Last Post: 05-22-2006, 09:26 AM
  3. 2214H 4" dust caps
    By Regis in forum Lansing Product Technical Help
    Replies: 17
    Last Post: 01-17-2006, 02:45 PM
  4. dust caps for tweeters in L-100s
    By rcpmac in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 11-10-2003, 06:42 PM
  5. Replacing dented dust caps
    By Royd in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 09-15-2003, 11:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •