dimensions of 2307

[richluvsound]

Please,can anyone help me with length on the 2307 horn . I need to know the distance from the back of the baffle to the yoke on the back of the dog box.
I have everything except the horns so I cant measure them.

Rich

[Ian Mackenzie]

I will pull the 2307 and have a look over the weekend.

[richluvsound]

you really are a gent .
many thanks ,Richard

[hjames]

Below please find picture of 2307 short horn plus driver. (my spare)
7 11/16 from flange face towards driver to flange face towards inside of cabinet. What else can I tell you?

Please,can anyone help me with length on the 2307 horn . I need to know the distance from the back of the baffle to the yoke on the back of the dog box.
I have everything except the horns so I cant measure them.

Rich

[boputnam]

What else can I tell you?

Is it OK if I tell you something? I suggest you excercise care when laying motors in proximity to computer drives.

You're OK with that AlNiCo motor - they don't have much of a surrounding field effect as they focus their flux into the gap - but a ferrite motor might have caused you, at least, to lose your Cookies (or worse!)...!

[hjames]

Is it OK if I tell you something? I suggest you exercise care when laying motors in proximity to computer drives.

You're OK with that AlNiCo motor - they don't have much of a surrounding field effect as they focus their flux into the gap - but a ferrite motor might have caused you, at least, to lose your Cookies (or worse!)...!

Thanks Bo - I appreciate the warning, but like it says in the mirror ...
Objects are not really as close as it appears in the picture ...

With over a terrabit of external storage (2x200=400 gigs in one external case, and 700 gigs in the other), I do want to keep the data, (and the music) safe ...

[boputnam]

Objects are not really as close as it appears in the picture ...

Ha! I always figured they were closer and so I must go even faster!!