Results 1 to 3 of 3

Thread: L7 Crossover

  1. #1
    Audiokarma
    Guest

    L7 Crossover

    I have not personally heard an L7 but it seems from my own experience that I can spot one inherent design issue that most likely contributes to the difficult placement issues I've read about.

    The side firing woofer crosses over at 170Hz. From my experience, low frequencies over 100Hz become more and more directional. It seems fairly obvious that these side firing woofers are going to cause some strange imaging issues, depending on placement and room acoustics. I'd suggest that the 8" mid bass driver would probably be more than capable of delivering the goods on anything over 80Hz. If I had designed the L7, I would have treated the side firing woofer as a sub and crossed it over to the 8" at somewhere between 80-100Hz.

    As far as crossover mods, I have to admit I am not technically inclined, but I wonder if a mod could me done to change the X-over point?

    Any thoughts on above would be appreciated.

  2. #2
    Senior Member Audiobeer's Avatar
    Join Date
    Apr 2003
    Location
    St. Peters, Mo just west of St. Louis.
    Posts
    2,407
    There's a few L-7 owners here, I think Zilch or TI may own a pair. I owned a pair at one time and for the closeout price of $800 I just could not imagine a speaker value at the time that equaled that. I never had any placement problems other than toe in. They are great speakers.

  3. #3
    Senior Member
    Join Date
    Feb 2004
    Location
    Central Coast California
    Posts
    9,042
    You can go here to find out a lot about the L7 and other L Series (1990s) speakers.

    http://www.audioheritage.org/vbullet...ead.php?t=7498

    Specific info on the L7, including the crossover begins around post #48.

    Keep reading to the posts with the pictures of the two networks and the diagram. I think the key to your last question lies with the blue jumper.

    I'm going to copy your post and move it to the L Series (1990s) thread so it's attached.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Crossover Value Selection - 2226/2446
    By jshocrylas in forum Lansing Product DIY Forum
    Replies: 20
    Last Post: 12-08-2017, 11:10 AM
  2. Biamp crossover question
    By Steve Gonzales in forum Electronic Crossovers
    Replies: 77
    Last Post: 04-16-2006, 01:56 PM
  3. xpl200 -dx1 -active crossover ? help !
    By gerard in forum Lansing Product Technical Help
    Replies: 1
    Last Post: 10-28-2005, 10:16 PM
  4. Repair/Rebuild 3110 crossover
    By wpod in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 10-16-2005, 01:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •