Results 1 to 5 of 5

Thread: Altec 416 T/S data?

  1. #1
    Junior Member
    Join Date
    Nov 2006
    Location
    Calgary on the Bow
    Posts
    28

    Altec 416 T/S data?

    Wondering if T/S data is availabel for Altec 416? This is one of a hand full of drivers that performed very well in a Karlson K15 cabinet. Am also wondering what modern driver might come close to the 416 in sound quality? No insult intended here but used and rebuilt Altecs cost a bundle. I would like to believe that with the world of experience someone builds a driver that sounds like this one? Any suggestions/comments? Best regards Moray James.

  2. #2
    Senior Member CONVERGENCE's Avatar
    Join Date
    Dec 2004
    Location
    CANADA
    Posts
    313
    Quote Originally Posted by moray james View Post
    Wondering if T/S data is availabel for Altec 416? This is one of a hand full of drivers that performed very well in a Karlson K15 cabinet. Am also wondering what modern driver might come close to the 416 in sound quality? No insult intended here but used and rebuilt Altecs cost a bundle. I would like to believe that with the world of experience someone builds a driver that sounds like this one? Any suggestions/comments? Best regards Moray James.
    You can purchase brand new 416 at GPA in either alnico or ferrite.Rated at 150 watts.
    Best thing is to phone Bill and ask him.

    http://www.greatplainsaudio.com/

    The Thiele Small Parameters are on the following chart.

    http://alteclansingunofficial.nlenet...ele-Small.html

    The next best speaker to a 416 8B is the Tad TL 1602. But be carefull on the frequency range limit on the Tad.If you want to match it with an Altec Lansing Horn. I believe the limit is not as high as the 416 8B.

    If you Choose a Tad Woofer I recommend also a Tad HF driver and what ever they recomment as far as horn goes.

    A lot of Augspurger Studio monitors had their JBL components replaced by Tad ones. Most of these monitors had JBL Bi Radial Horns. And some with Super Tweeter also.

    Mismatching does not always work and should be avoided as much as possible. The Drivers were designed with a specific horn to match.And Woofer bass bin and driver.

    .................................................. ..........................................
    Last edited by CONVERGENCE; 12-18-2006 at 07:44 PM. Reason: INFO

  3. #3
    Junior Member
    Join Date
    Nov 2006
    Location
    Calgary on the Bow
    Posts
    28

    Thank you, will contact GPA. nt.

    nt.

  4. #4
    RIP 2009
    Join Date
    Feb 2004
    Location
    Rohnert Park, CA
    Posts
    3,785
    They've got info on 3 different 416's here: http://www.thielesmall.com/database.asp

    John

  5. #5
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    9,963

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Altec vs. JBL vs. TAD
    By RacerXtreme in forum Lansing Product DIY Forum
    Replies: 21
    Last Post: 10-11-2007, 02:52 PM
  2. Plantronics to Acquire Altec Lansing
    By watchman in forum Lansing Product General Information
    Replies: 10
    Last Post: 08-31-2006, 09:04 AM
  3. Altec 416 repair
    By John in forum Lansing Product Technical Help
    Replies: 0
    Last Post: 06-27-2004, 07:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •