4344 Production Plans

[britishbulldog]

Hi Guys,

I live in England and i'am new to the world of building speaker systems.
I currently have a home cinema conversation in my garage measuring
16ft long x 10ft wide x 8ft high cieling.I constructed a room with in a room using 3x2 studs - 75mm slab insulation-sheet of 5mm rubber and a 15mm soundblock plaster board.I have a raised section at the back again using a floating floor, put 4 mdf tapered pillers in along the side and put in to corner pieces to take out the 90 degree angles in the corner.My electronics are Lexicon DC2-Parasound HCA2235 5 Channel power amp and the current speakers are M&K 850 With 2 10 inch subs.Would like to build either altec voice of the theatre 1/2 size or JBL Horn loaded what would you guys recomend?

[yggdrasil]

Please start a new thread with your question, so we can stay on topic.

[Thomas B]

Hi ayaboh,

Really outstanding work. Can you publish a final network?

/Thomas B

[ayaboh]

I have been busy with a lot of other projects lately, but I will post a follow-up for the networks and wiring when they are ready. I have used Giskards cc layout and part list with Solen inductors and Mills resistors. Caps are all Intertechnik Audyn Q4.

Here is a picture of all boards before soldering, and without resistors.

[Thomas B]

That is some serious piece of network. I have been thinking of building the 4350/55 or maybe the 4345 system. Now I have been contemplating your outstanding 4344 upgrade system. My only problem is to find the drivers. Can new JBL replacement drivers be used?

/Thomas B

[Guido]

That is some serious piece of network. I have been thinking of building the 4350/55 or maybe the 4345 system. Now I have been contemplating your outstanding 4344 upgrade system. My only problem is to find the drivers. Can new JBL replacement drivers be used?

/Thomas B

Hi Thomas

If you are ready to buy fresh reconed drivers for that project and know that you can't have them for cheap I might be able to help you.

Please PM me with your mail adress.

[ayaboh]

My only problem is to find the drivers. Can new JBL replacement drivers be used?

/Thomas B

Kenny at KC Audio Gothenburg is a good place to start.

[pos]

working links to the plans:

http://audioheritage.org/vbulletin/s...4&postcount=34

[cricri]

[Quote = pos ; 267843 ] des liens de travail avec les plans :

http://audioheritage.org/vbulletin/s...4&postcount=34[/ Quote]


Salut Thomas ,

Il sont la les plans ! il y a bien le PDF du filtre , c'est avec ça que j'ai fabriqué les miens

merci pour le coup de main , pour tes 2245H fais moi signe si tu est vendeur

tes passé à coté d'eux

[Amnes]

Since I'm writing in this thread - Mad props to ayaboh for making these plans. My carpenter loves them (although his PC less). Now, the plans state the port ducts being R110x32mm. Was it supposed to be 320mm or something around that? According to this file it should be 8 and 1/4 inch which translates to 21cm. What is the proper length?