Hi,

Hope some of you skilled guys have an advice or two for repairing my L166 grills.

1: The front part of the grill (w. the up-and-down pattern) has come partly loose from the grill frame – causing the grills to rattle.
What is the best way to glue the back (tight) to the front? I don’t want the glue to be visible through the holes in the front part.

2: The cloth on the back side of the grills seems to be glued to the grill (very light) at those points of the grill, which goes inwards (towards the speaker). At some of the points, the glue seems to be gone.
Any ideas how to glue that back on? Again it should not be visible – or audible…

3: A few places the front grill has come out of shape (pressed in).
Can I heat them with a hair drier and push them back (almost) in the original shape?

Any ideas appreciated – thanks!
- Claus