Results 1 to 3 of 3

Thread: x10d high frequencies

  1. #1
    AGalvani
    Guest

    x10d high frequencies

    Hi, I have a pair of Altec 846b Valencia and I am very enthusiast of it, but sometimes iIwould prefer an improved extension of high frequencies; so I think a pair of JBL 2405 would be the best solution. But my question is, how to cross 2405 with 807 8a , and which frequency ?

  2. #2
    Senior Member spkrman57's Avatar
    Join Date
    Feb 2005
    Location
    Columbus, Ohio
    Posts
    2,018

    I use a single 1 ufd oil cap with L-pad

    Usually all that is needed is some air on top....


    Ron
    JBL Pro for home use!

  3. #3
    Senior Member Don Mascali's Avatar
    Join Date
    Sep 2004
    Location
    Sarasota, Florida
    Posts
    494
    I have a pair of JBL Everest horns w/2425H drivers, X-over at 800 HZ active (24db L/R) and no cuttoff on top.

    I added 2405H in parallel, with just a 2.0 mfd capacitor in series on the positive lead for a gentle slope. It sounds good to me as is, but now that the weather is bad I hope to have time to experiment with some other cap values. The frequency is supposed to be about 9000HZ but I haven't tested it yet. I have tried 2404H too but I keep comming back to the 2405H. I may have the wrong diaphrams installed on the 2404H ?

    All of my other X-overs are active so I can't justify an amp for the tweeters alone.
    4406, 4412A, L100, L100t3 (3 pair), L1, L7, 4645C, 4660A, 4695B, SR4735 and various DIY JBL Pro loaded systems.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DIY Axially symmetric oblate spheroid CD waveguides, in solid Oak
    By jack_bouska in forum Lansing Product DIY Forum
    Replies: 39
    Last Post: 11-14-2010, 12:36 PM
  2. Paragon Project Complete...
    By Alan Fletcher in forum Lansing Product DIY Forum
    Replies: 51
    Last Post: 07-19-2006, 07:55 AM
  3. How high can they go, 2206, 2226, 2242
    By Niklas Nord in forum Lansing Product General Information
    Replies: 3
    Last Post: 01-27-2005, 01:29 AM
  4. Northridge & cross-over frequencies
    By Jan Daugaard in forum Lansing Product General Information
    Replies: 0
    Last Post: 12-20-2003, 11:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •