Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: wood question.

  1. #1
    Member
    Join Date
    Dec 2005
    Location
    Indiana, USA
    Posts
    73

    wood question.

    Greetings all.

    I will probably get flamed here, but try to bare with my question. I have several pieces from the T3 line (2 pair 100's, 3 pair 20's) and I actually love (be nice now...) the wood veneer. I know it has consistently be described as “crappy” but out of all of the pieces, none have a single bubble or crack or flaw (I do have one of my four L60t cabs with bubbling but I picked up that pair for $60, so I cannot complain there).

    My question regards the type of wood and stain color. I am about to begin a project of an entertainment center based on the Salamander Synergy concept, and I would potentially like to match the wood (or at least be in the same color family). It looks a lot like the Italian Rosewood one the Oakwood website, http://www.oakwoodveneer.com/samples/samples6.html , but I can’t imagine JBL spending that much on a consumer line. Other thoughts is that it is maybe ash, or walnut like the predecessors L*T line, but the grain seems to be completely different.

    Thanks in advance, and any help would be greatly appreciated.

    Kevin.

  2. #2
    Senior Member alexkerhead's Avatar
    Join Date
    Sep 2005
    Location
    AlabamaLand
    Posts
    202
    Those cabs wont stain right.
    You will need to remove the old veneer and apply new veneer(easy).

    Get something similar to this.
    http://www.partsexpress.com/pe/showd...number=260-048

    And stain it the color you want.


    Good day!

    Alex

  3. #3
    Member
    Join Date
    Dec 2005
    Location
    Indiana, USA
    Posts
    73
    Actually, I am wanting to make the new project match the present speakers. I like to T3 dark red color.

  4. #4
    Senior Member alexkerhead's Avatar
    Join Date
    Sep 2005
    Location
    AlabamaLand
    Posts
    202
    Quote Originally Posted by eyedoc
    Actually, I am wanting to make the new project match the present speakers. I like to T3 dark red color.
    Oh, ok, then you might want to look for a rack that matches closely, but can be stained the same color.

  5. #5
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,720
    Call Oakwood and ask for samples... they will mail you a couple of approximately 5" squares that you can experiment on a portion of.

    BTW: I have a sample of their "Italian Rosewood"... it is a manufactured product that I thought looked a little hoaky.


    Widget

  6. #6
    Senior Member alexkerhead's Avatar
    Join Date
    Sep 2005
    Location
    AlabamaLand
    Posts
    202
    Eyedoc,

    I have been informed in another thread that the advice I provided is completely wrong and should not be taken into consideration.

    I apologize for any misadvice I provided.
    Although I cannot see a problem with any of it.

    You could also get a unfinished entertainment center and stain it the color you like.

  7. #7
    Senior Member
    Join Date
    Sep 2006
    Location
    San Jose
    Posts
    846
    If you're talking about L100's it was called walnut. I have no idea if that was helpful but it seemed at least harmless.

  8. #8
    Member
    Join Date
    Dec 2005
    Location
    Indiana, USA
    Posts
    73
    Alex,

    Thanks for your help, but yes your recommendations are different from my intention. I am planning on designing and building a unit from scratch (or wood of course), and am looking for the actual wood and stain recipe (or color) to match the speakers (L100t3 series) in their present color.

  9. #9
    Senior Member alexkerhead's Avatar
    Join Date
    Sep 2005
    Location
    AlabamaLand
    Posts
    202
    Ah, I see.
    you might goto lowes or wherever you can find a wide variety of stain and see what they have.
    Minwax is my favorite, especially the oil variety.
    The provincial 211 and special walnut seem like a good color matches.
    Here are the color choices.
    http://www.minwax.com/products/woods...nish-color.cfm

    Here is the type of stain I use.
    http://www.minwax.com/products/woodstain/woodfinish.cfm

  10. #10
    Senior Member Phil H's Avatar
    Join Date
    Sep 2005
    Location
    Tujunga, CA
    Posts
    201
    I don't think this is much help. But the T3 brochure in the library says that they were oak or walnut veneer.
    http://www.lansingheritage.org/html/...8-l-series.htm

  11. #11
    Senior Member hmolwitz's Avatar
    Join Date
    Sep 2005
    Location
    Darien CT
    Posts
    326

    Stain Match

    Go to Sherwin Williams with a sample of your wood and your speaker and have them match the color.
    I have had excellent luck with that.
    Their stain is good and the match is free, though the quality of the match depends on the skill of the worker.
    Harry

  12. #12
    Senior Member Don Mascali's Avatar
    Join Date
    Sep 2004
    Location
    Sarasota, Florida
    Posts
    494
    On one of my old projects I wanted a reddish oak color. I took MinWax Golden Oak stain and added Oxblood paste shoe polish and kept trying spots on a scrap piece of wood until It looked right.
    I would bet if you used medium walnut stain on walnut veneer and experimented with additives you could get it right.

    You can use anything that disolves in the mineral spirits base of the stain to color it.
    4406, 4412A, L100, L100t3 (3 pair), L1, L7, 4645C, 4660A, 4695B, SR4735 and various DIY JBL Pro loaded systems.

  13. #13
    J.A.F.S.
    Join Date
    Aug 2005
    Location
    Back in the audio lab.
    Posts
    380

    Reddish stain

    I am attempting the same Rosewood-like color for my girfriend's home theater system. I am using Varathane brand stain, color name is CABERNET. It seems to do the trick.
    Amazed I'm still alive!
    Tim

  14. #14
    Senior Member
    Join Date
    Jun 2006
    Location
    SoCA
    Posts
    104

    Some woodworking references

    www.woodworkerssource.net provided some nice reference material.

    IMHO, hardwoods vary greatly in grain, color, tint, and general appearance from one lot to the next. This is obvious i that they come from different trees which have grown sometimes in vastly different areas.

    Cabinet makers will spend quite a bit of time and material wastage trying to match grains, and complement one another when matching adjacent pieces.

    Some finely grained hardwoods such as mahogany are more easily matched than say oak.

    The color of the finished product will depend on the grain, dryness, original color, depth of penetration of the stain, depth of penetration of sealing layer, type of sealant (tung oil vs polyurethane vs varnish). Matching the color, tint, and hue is probably easier with a paint, as it is the finish color. The stain's finish color will be influenced by both substrate and sealing properties.

    Another approach is simply to try an duplicate the same material and processes on all pieces.

    Least expensive might be a long run of veneer bookmatched so that as you finish one speaker cabinet, enough remaining veneer cut from the same log may be applied to the next cabinet. Then process all in nearly similar methods. For example, applying your stain in one long strech down the length of the cabinet, then applying the next adjacent so tha overlapping stains have the same density of stain applied to the surface.

    The Oct 2004 issue of Wood Magazine has a couple of good articles on staining and finishing that better explain the process.

    Grit of sandpaper used will vastly change the color tone between different pieces.

    Big differences between dye and stain, as well as how some woods with lighter natural color may absorb more stain than adjacent drk areas resulting in a finished piece with inverted colors, i.e. light wood is now the darker wood color.

    http://miniwax.com/shoptalk/resources/basics.cfm

  15. #15
    Senior Member
    Join Date
    Jun 2006
    Location
    SoCA
    Posts
    104

    JBL Blue

    On a different note, does anybody have a federal color number or different paint manufacturuer color number for the JBL Monitor baffle blue. Tint, shade, hue, additives or crinkle finish as appropriate is also appreciated.

    Also does anybody know how the original baffles on JBL Blue monitors were prefinished? Sealed or primed? how many coats, how much penetration? Thanks in advance.

    These colors are are notorious for being matched over the Internet. The original picture, .jpg, monitor, brightness and contrast all vary considerably for Internet photos to mean much. When matching colors in paint, even with the same base paint, hue, tint, tone, and shade may gratly effect the final match.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. L100 Grille Peg question
    By kworrilow in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 06-20-2014, 02:41 PM
  2. LE15 Surround Question / compression Driver question
    By mech986 in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 05-20-2006, 03:53 PM
  3. A serious question.
    By Rolf in forum Forum Feedback
    Replies: 61
    Last Post: 04-05-2006, 02:20 PM
  4. Question re: Olympus Speaker Ports(?)
    By henflet in forum Lansing Product General Information
    Replies: 3
    Last Post: 01-19-2006, 12:03 PM
  5. Non-Searching Newbie Question solution?
    By Regis in forum Forum Feedback
    Replies: 7
    Last Post: 05-04-2005, 07:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •