Hello JBL fans
As they say I'am on a misson... I have some desing ideas and were I want to go with this but I feel I need some insight on what to do for some maters (aka the do's and dont's of DIY dipoles with a direct mode )
Design Goals:-Have a footprint no bigger then 23''(H)x14''(w)7"(D)
-Meet the requirments for a THX certified dipole speaker
-Timber match my current system
-Amazing performce in not only performence in Ht but in DVD
Audio as well
-Be switchable from cinema mode to music remotely
Current system:-Pioneer VSX84TSX
-JBL HT4H (center)
-JBL HT4V (fronts)
-JBL E10's (to be replaced with this spectacular project
, SR )
-JBL Tour (to be replaced by HT4V, SRB)
Drivers:-332241-001 (mid)
-336347-001 (tweeter)
-.......?........(woofer)
Horn:-Bi-Raidal 336363-001 (for tweeter)
As you can read its quite the misson but I got some snags... I dont have the white paper or datasheet not sure witch you call it So there for I need some generious member to provide some info, please or I'll not be able to work out the tunning box freq and tweeter horn configuration.
For the low frequency driver I'am not sure what to use I had some Ideas of using some venue or possibly even an extra 332241-001 driver?
I'am also not sure if it would be wise to use 2xHT5 X-over's and wire them out of phase, or DIY it also
any inquiries, thoughts or pms are most certainly welcome
Skoda