Results 1 to 4 of 4

Thread: 034 Tweeter

  1. #1
    Member
    Join Date
    May 2005
    Location
    Bristow, VA
    Posts
    36

    034 Tweeter

    Can anyone tell me what the frequency range is of the 034 tweeter that is used in the L46 speaker? Alternately, what is the frequency range of the L46? I'm trying to see how high they are good for.

    I've searched the forum with no luck on this. The Tech Sheet doesn't mention frequency range for the L46.

  2. #2
    Member
    Join Date
    May 2005
    Location
    Bristow, VA
    Posts
    36

    Wink

    I looked a little harder in the forum and found my answer:

    Quote Originally Posted by Giskard
    Hello,

    The 034 is the plastic version of the cast aluminum 044. It was used in the L15, L46, L56, and L86 systems. The 035Ti is the plastic version of the cast aluminum 044Ti and it is used in numerous Pro and Consumer systems.

    The 034/044 used phenolic diaphragms coated with aluminum and they are "good" to ~ 15 kHz and ~ 18 kHz respectively. The 035Ti/044Ti used titanium diaphragms and are "good" to ~ 25 kHz and ~ 28 kHz respectively. The difference in response is supposed to be due to the plastic versions having ~ 1/2 pound less magnetic material.
    From: http://www.audioheritage.org/vbullet...;highlight=034

    Post #4

  3. #3
    Senior Member Chris Brown's Avatar
    Join Date
    Jan 2005
    Location
    Northern California
    Posts
    165

    JBL 033 vs 034

    I have 033’s in my L150’s, but looking at the L150 tech sheet it says 034 as a replacement. My 033’s work fine and I like them but when I saw a pair of 034’s for cheap I figured I’d get them to experiment with or worst case as a spare.

    I look forward to taking pictures and telling you guys what I think once they arrive. The only downside is that these 034’s are missing the wire grill, but from my quick research it seems it doesn’t make a huge difference. We’ll see.

    What should I expect from the 034's vs. the 033's?

  4. #4
    Senior Member Chris Brown's Avatar
    Join Date
    Jan 2005
    Location
    Northern California
    Posts
    165
    Well this should be interesting for a while. The 033’s were a real bitch to get out, like they had a thin layer of glue holding them in or something. My initial reaction after listening to it after swapping them out is that it sounds about the same. I haven’t had it loud yet though, so maybe that is where the differences will show themselves. I like being able to play with new drivers without having to make any permanent modifications






Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 034 PR in Mod'd L150
    By Regis in forum Lansing Product General Information
    Replies: 3
    Last Post: 10-27-2006, 02:20 PM
  2. the 075 2402 bullet tweeter ? use ina 91db/w system
    By Timothy Bailey in forum Lansing Product DIY Forum
    Replies: 1
    Last Post: 06-28-2006, 04:25 AM
  3. 034 TWEETER
    By jandregg in forum Lansing Product General Information
    Replies: 0
    Last Post: 06-01-2005, 12:05 PM
  4. Crossovers for K2S9800 and/or S1M, tweeter over 1,5"driver
    By sebackman in forum Lansing Product Technical Help
    Replies: 7
    Last Post: 02-16-2004, 02:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •