Results 1 to 3 of 3

Thread: Jensen H222 crossover network

  1. #1
    Junior Member Joao's Avatar
    Join Date
    Feb 2006
    Location
    Konstanz - Germany
    Posts
    9

    Jensen H222 crossover network

    Hello

    I've got a H222 coax driver without any crossover network. The drivers are matched and in perfect condition.
    I read on datasheets that it is inbuild, but I found nothing - only one driver had a 1uF capacitor at the terminals to the HF.
    Can you give me a tip or schematic for the crossover, or is a 1uF cap enough for this application? I've read that crossover is at 2KHz.

    Thank you in advance for your help!

    Kind regards
    Joao
    Last edited by Joao; 10-12-2006 at 08:31 AM. Reason: modification

  2. #2
    Senior Member spkrman57's Avatar
    Join Date
    Feb 2005
    Location
    Columbus, Ohio
    Posts
    1,985

    That might be the whole crossover.

    If the LF driver is run full out they might have used the 1 ufd cap for the horn just to add some air to it.

    Not sure what the original crossover was, but just my thoughts on that!

    Can't hurt it any to run it like that, it might sound wierd if there was more to it.

    Let us know how it sounds.

    You could also make a crossover using 2nd order HF/LF and see if you can improve on it.

    Can you post any pics of the unit. Might be easier to made a educated guess after looking at it.

    Hope this helps! Maybe a expert with experience will chime in here!

    Ron
    JBL Pro for home use!

  3. #3
    Senior Member
    Join Date
    Apr 2003
    Location
    Via de WiFi
    Posts
    331
    It is very common for many older coaxial speakers to use a single cap as the crossover. The RCA LC-1A and Electro-Voice 12TRXB are set up that way, for example.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 3155 crossover network
    By Mike C in forum Lansing Product General Information
    Replies: 10
    Last Post: 02-22-2014, 11:13 AM
  2. All Pass Crossover Network??
    By Guido in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 01-07-2007, 07:26 PM
  3. New Equivalent 3145 crossover Network
    By Ian Mackenzie in forum Lansing Product DIY Forum
    Replies: 24
    Last Post: 10-15-2006, 05:46 AM
  4. Crossover Network Capacitor Values Question
    By maabx in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 10-04-2005, 03:57 PM
  5. l-110 crossover network
    By breadman in forum Lansing Product Technical Help
    Replies: 6
    Last Post: 11-24-2004, 06:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •