Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: JBL / Gauss / Cetec Information

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member UreiCollector's Avatar
    Join Date
    Dec 2005
    Location
    NY. USA.
    Posts
    230

    JBL / Gauss / Cetec Information

    Does anyone have some information on the JBL Gauss co-axial's? I'm pretty sure that JBL had aquired Gauss at some point, and that the company had a line of co-axial monitors, but information is elusive, and actual drivers are near impossible to come by. Thanks for ANY comments on this rare breed.

    UreiCollector
    Frederick

  2. #2
    Tom Loizeaux
    Guest
    I'm no athority by any means, but I understand that the Urei monitors used Altec originally, then switched to JBL. JBL eventually aquired Urei. It was EV that aquired Gauss a few years ago and then ended the Gauss line.

    Tom

  3. #3
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,200
    You mean these guys here?? That is not an Altec woofer and the compression driver looks like a 2425 with no tire.

    http://cgi.ebay.com/Urei-801-15-Dupl...em270034130005

    The reference chart just gives you revision numbers and the coaxes so it's not much help.

    http://www.jblproservice.com/pdf/Sys...I%20Series.pdf


    Rob

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    For future reference here are the images.


    Widget
    Attached Images Attached Images    

  5. #5
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    If anyone cares...

    Those co-axials are PAS (Professional Audio Systems) CXL-1580 (3" VC)...OEM'ed for UREI with a JBL 2425 driver.

    I changed my answer. It's definitely a CXL-1580

    Why? Because the CXL-1580 is for a 1" exit compression driver. The CX-2580 has a 4" voice coil and is for a 2" exit compression driver.


    The next co-ax for the UREI 813C was the 801C which was a JBL E145 modified into a co-ax. I believe Rob has one or two of those. I seen pitchers.


    Too bad the seller doesn't really know what it is...although PAS woofers are very much like Altec....as well as being very underrated.

    Great stuff made right here in SoCal.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  6. #6
    Administrator Robh3606's Avatar
    Join Date
    Apr 2003
    Location
    Rocinante
    Posts
    8,200
    Thanks Edge

    That's one mystery solved. I was wondering what woofers those were. Edge which driver would that be in the matrix, if it's in there at all??? Maybe we can add the driver photo's to the Photo Gallery so we have them there and they won't get "lost" with the thread over time??

    Rob

  7. #7
    Senior Member GordonW's Avatar
    Join Date
    May 2003
    Location
    Marietta/Moultrie GA USA
    Posts
    1,455
    Quote Originally Posted by edgewound View Post
    If anyone cares...

    Those co-axials are PAS (Professional Audio Systems) CXL-1580 (3" VC)...OEM'ed for UREI with a JBL 2425 driver.

    (...)

    Too bad the seller doesn't really know what it is...although PAS woofers are very much like Altec....as well as being very underrated.

    Great stuff made right here in SoCal.

    Unfortunately, it looks like the PAS stuff is no longer going to be made in the USA. We regularly are in contact with PAS (reconing center), and in one of our recent conversations, we found out that PAS has been bought out by a far-Eastern company... and that factory recone kits for the classic PAS drivers will NO LONGER be available.

    We've been scrambling to find appropriate third-party parts to replace these factory kits for the PAS drivers... fortunately, we've been able to sub in some other readily-available parts and keep 'em going up to very near original spec...


    Regards,
    Gordon.

  8. #8
    Junior Member
    Join Date
    Jun 2008
    Location
    uk
    Posts
    7

    ureicollector/gauss

    There are a pair of Cetec Gauss 3588's on Ebay.co.uk(9230324975101).Regards Gary.

  9. #9
    dj1620
    Guest
    I am posting photos of some Gauss speakers I have for sale in the LA area. The drivers in the 7258 monitors are the 3588 co-ax 15" drivers mentioned in this post. also shown are two very large 7480 studio monitors, anchored by 18" drivers.
    Attached Images Attached Images   

  10. #10
    Moderator hjames's Avatar
    Join Date
    Nov 2005
    Location
    NoVA - DC 'burbs
    Posts
    8,548
    Just a though - post a price and put your ad in the For Sale section?

    Quote Originally Posted by dj1620 View Post
    I am posting photos of some Gauss speakers I have for sale in the LA area. The drivers in the 7258 monitors are the 3588 co-ax 15" drivers mentioned in this post. also shown are two very large 7480 studio monitors, anchored by 18" drivers.
    2ch: WiiM Pro; Topping E30 II DAC; Oppo, Acurus RL-11, Acurus A200, JBL Dynamics Project - Offline: L212-TwinStack, VonSchweikert VR-4
    7: TIVO, Oppo BDP103D, B&K, 2pr UREI 809A, TF600, JBL B460

  11. #11
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    Thanks for sharing these Gauss beauties... I rotated this one for a better view.

    I wonder if there is a missing lens or something in front of the mid horn. Does anyone have more info on these?

    Widget

    BTW: Welcome aboard... and as Heather pointed out, it wouldn't be a bad idea to also start a new thread in the Market Place area announcing their sale.
    Attached Images Attached Images  

  12. #12
    Senior Moment Member Oldmics's Avatar
    Join Date
    Apr 2003
    Location
    Between Venus and Mars
    Posts
    872

    Mr.Widget asks

    "Does anyone have more info on these?"

    Widget

    Don has all of my Gauss info.

    These studio monitors were included in that information.

    Don,could you scan and post that info?

    Oldmics

  13. #13
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    Damn... that's too bad. Don has been away for quite a spell... hopefully when he returns this and other mysteries will be cleared up.

    They do look like serious pieces of gear. I would love to audition them.


    Widget

  14. #14
    Tom Loizeaux
    Guest
    They look like Gauss's version of JBL 4343s!

    Tom

  15. #15
    Junior Member
    Join Date
    Oct 2016
    Location
    chavenay , France
    Posts
    2

    mysterious speakers

    Bonjour à tous !
    J'ai trouvé une paire de nouveaux haut-parleurs GAUSS lors d'une recherche dans le stock de l'ancien importateur de la marque en France. Ils portent le code 3285 et ressemblent beaucoup au Gauss 3288, mais ont un cornet de 1 "qui est différent!
    Je n’ai trouvé aucune information à leur sujet ... et pourtant je suis bien documenté ... merci pour votre aide; je pense qu’ils sont très rares, si quelqu'un à une information ???
    Attached Images Attached Images  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gauss drivers
    By sa660 in forum Miscellaneous Gear
    Replies: 5
    Last Post: 02-12-2008, 02:33 AM
  2. To gauss or not to gauss
    By Donald in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 11-27-2004, 12:27 PM
  3. Gauss....Thanks to all
    By Reconer in forum General Audio Discussion
    Replies: 6
    Last Post: 01-26-2004, 12:47 PM
  4. Gauss 3184
    By Mr. Widget in forum Miscellaneous Gear
    Replies: 2
    Last Post: 06-28-2003, 01:30 PM
  5. Gauss
    By soundmanshorty in forum Lansing Product General Information
    Replies: 3
    Last Post: 05-14-2003, 08:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •