I have the bug agin

[gene]

Hello, I want to start a new jbl project. and I need some help. I want to use two 2242h drivers and jbl 2246h driver. in a 10 cubic ft cabinet. I also want to know does jbl make a horn like the jbl k2 9500, I would like to have a three way system just like the 9500 but using two 2242h low frequency woofers and a 2245h in the middle. is this possible. and if so were can I buy that horn. and if not possible what horn does jbl sale that I can use in this set up. thanks

[Ian Mackenzie]

Gene,

I doubt if it would work very well.

[gene]

I was wrong I said 2246 but I wanted to say jbl 2446h and two 2242h per speaker. am I missing something, the 2242h freq responce is 25hz to 1.6khz and the 2446h is 500hz to 20khz and if I use a xover at 1000 khz or 1200khz this would not work . I would use a 10 cubic ft cabinet with each 2242h in its own 4.5 cubic ft with in the 10 cubic ft cabinet

[matsj]

I think you should have a 2226h to play 60-600hz for better result.
If you cross the 2242/2226 around 60-80hz and the 2226/2446 around 600hz.
I have the same speaker in this config. Instead of 2242 i have 2243 and 2245.

regards mats

[Robh3606]

Hello Gene

What are you trying to do?? Do you want a 2 way MTM??

Rob

[gene]

Hello mats, thanks for the info . have any pictures of your speakers