Originally Posted by
spkrman57
Wayne over at Pi speakers uses the 2226 up to 1.6khz to mesh with a 1" driver crossed over at 3rd order 1.6khz.
The coil is not used for crossover purposes but instead reduces a natural rising response of the 2226 between 800hz and 1.6khz.
The 2226 is down 20db at 2khz from what I have read from others.
I use the 2226 in this fashion and find the results quite pleasing depending on the amp/2226 enclosure design and very critical is room placement.
You must get them off the ground to avoid a muddiness at 250hz(common to most woofers/midbass drivers placed close to the ground.
Hope this helps!
Ron