Loading cap removal

[seetlee]

I just replaced two 6 uF loading caps on 902 drivers that had indifferent output. The one cap I measured read .016 uF on my Fluke. With the loading caps removed, the drivers now sound very good.

--Carter

[I have been reading for a long time--thanks, guys.
This is the first time I had something helpful to add].

did u remove the screwed on plastic cap or the soldered on electrolytic capacitors on the positive leads.
The 902-16HF has a 6uf capacitor connected in series to the positive lead but the 902-16B does not have any capacitor. Which did you removed? is yours the HF or the B version