Results 1 to 4 of 4

Thread: N2600 xover questions

  1. #1
    Junior Member
    Join Date
    Jun 2006
    Location
    Burlington, VT
    Posts
    22

    N2600 xover questions

    hi,
    I have a pair of N2600 crossovers, and was wondering if I was correct in assuming that the post driver connections numbers are:

    1 = Woofer positive
    2 = Woofer negative
    3 = 075 negative
    4 = 075 positive

    Like the N1200 posts?

    Also, tweeters don't stay at the same volume. I'm guessing the LPads need cleaning. But I don't see how to open the LPads.

    I can also see the change in volume on an ohm-meter(connecting to tweeter posts).

    Thank you,
    Darrell

  2. #2
    Junior Member
    Join Date
    Jun 2006
    Location
    Burlington, VT
    Posts
    22

    Question JBL N2600 crossover

    I am unsure about keeping the HF and LF in phase. I can't tell by listening to them.

    There are no markings near my N2600 driver terminals, indicating (+) or (-).

    The terminals are numbered 1,2,3 and 4. With LF above 1 and 2. And HF above 3 and 4.

    I found an N1200 on eBay that is pictured with a (+) sign on terminals 1 and 4.

    Does that apply to my N2600 terminals?

    Thank you,
    Darrell

  3. #3
    RIP 2011 Zilch's Avatar
    Join Date
    Jun 2004
    Location
    Berkeley, CA
    Posts
    10,036

  4. #4
    Junior Member
    Join Date
    Jun 2006
    Location
    Burlington, VT
    Posts
    22
    Thank you, Zilch.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4312/L96 questions...........
    By victa1 in forum Lansing Product General Information
    Replies: 5
    Last Post: 09-27-2005, 04:51 PM
  2. JBL xover & horn compensation primer
    By aust-ted in forum Lansing Product Technical Help
    Replies: 3
    Last Post: 02-13-2005, 05:22 PM
  3. Xover frequency - am I deaf or what??
    By scorpio in forum Lansing Product General Information
    Replies: 2
    Last Post: 01-14-2005, 09:36 AM
  4. HELP DIY L250TI XOVER & CABINET
    By gerard in forum Lansing Product DIY Forum
    Replies: 8
    Last Post: 12-01-2004, 02:31 AM
  5. Advice requested for xover for old JBL D131 and new horn
    By jonathan z in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 12-13-2003, 10:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •