Results 1 to 6 of 6

Thread: help please identify cabinet enclosures

  1. #1
    Junior Member
    Join Date
    Jul 2009
    Location
    florida
    Posts
    2

    help please identify cabinet enclosures

    can someone please advise me as to identify these cabinets id like to sell them and dont want to misrepresent them
    Attached Images Attached Images    

  2. #2
    Senior Member
    Join Date
    May 2008
    Location
    Westchester NY
    Posts
    1,120
    Looks like the drivers are not the original for these cabs but I could be wrong. Anyway, the 15" woofers appear to be Altec model 416s to me. If you take the woofer caps off you could confirm this.

    Value is based on condition. If the 416s are original they should bring at least $125 per unit or more, I suppose.

  3. #3
    Junior Member
    Join Date
    Jul 2009
    Location
    florida
    Posts
    2
    yes i suspected that i was looking to identify the cabinet so i could sell it seperate from the speaker which is a 415c according to the altec stick on front do you suppose this may have been a valencia cabinet made with three speaker option rather than the normal two speaker design ive seen
    thank you again for your imput

  4. #4
    Senior Member
    Join Date
    May 2008
    Location
    Westchester NY
    Posts
    1,120
    The cab looks in good shape but it probably cant be shipped easily so you need to sell it locally. I assume it would go for under $50, I suppose.

  5. #5
    Senior Member
    Join Date
    Feb 2009
    Location
    Michigan
    Posts
    115
    It looks like the "builder" took the decal off the back of the 415 and stuck it to the front of the cabinet.

  6. #6
    Senior Member
    Join Date
    Aug 2003
    Location
    Santa Cruz, CA
    Posts
    301
    Looks like a nice cabinet from one of the 3rd party suppliers for such back in the day. Clearly, these weren't assembled by a dealer, however, judging by the hack job of installation and wiring.

    I'd suspect DIY and experimentation....

    Cheers,

    David

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. DIY Axially symmetric oblate spheroid CD waveguides, in solid Oak
    By jack_bouska in forum Lansing Product DIY Forum
    Replies: 39
    Last Post: 11-14-2010, 12:36 PM
  2. Dual 18" 2242H Cabinet Design
    By Serge in forum Lansing Product DIY Forum
    Replies: 15
    Last Post: 03-30-2009, 03:33 PM
  3. Bass guitar cabinet (K-140, 2461, 2301, 3101, 3.5 cu ft)
    By McDuff in forum Lansing Product DIY Forum
    Replies: 6
    Last Post: 09-05-2007, 06:36 PM
  4. D504 with D130 ?
    By honist_bob in forum Lansing Product General Information
    Replies: 6
    Last Post: 02-01-2006, 12:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •