Results 1 to 5 of 5

Thread: Shipping Damaged Nakamichi Amp

  1. #1
    Senior Member
    Join Date
    Jan 2006
    Location
    Montgomery, AL
    Posts
    171

    Shipping Damaged Nakamichi Amp

    I bought a Nakamichi PA-7 to power the L250's I recently acquired. In spite of the exceptional packaging by the seller, UPS managed to damage it. They obviously dropped it and the rear panel was dented in pretty good. At 56 pounds this is fairly heavy so it had to have taken a solid hit. It appears as though the rear panel is aluminum, so it may have been relatively easy to bend. I am pondering what kind of internal damage, if any, would be possible to have been sustained. (I have not powered the unit up to see if it works.) Also wondering what kind of dimunition in value this will result in. UPS is supposed to contact me by tomorrow afternoon (6-20-06) to set up an inspection. Any and all comments, suggestions and/or recommendations on these and any other issues that need to be considered will be appreciated.

  2. #2
    RIP 2009
    Join Date
    Feb 2004
    Location
    Rohnert Park, CA
    Posts
    3,785
    'Don't know what to tell you, but I've totally given up on UPS. The last 4 packages I've received from them have ALL been damaged!! It's like it's a requirement with them - they have to drop every package, (especially heavy ones!), at least once!

    The real drag is that eBay only gives sellers the option to calculate shipping via UPS or USPS, so that's what most sellers use. They should also include FedEx, from which I've had excellent service.

    John

  3. #3
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Quote Originally Posted by doyall
    ...I am pondering what kind of internal damage, if any, would be possible to have been sustained. (I have not powered the unit up to see if it works.)
    1. Take a lot of pictures of the unit and the carton. Next time, do this BEFORE opening.
    2. Do not power-up before looking inside the unit. Take off the cover.
    3. Look to make sure the PCB's are not cracked, or loose.
    4. Make sure none of the heavy components have broken loose from their fittings (power supply, heat sinks, etc.)
    5. Look for any loose parts / pieces inside.
    6. Power-up without connecting to anything. If it cycles through start-up without tripping itself, hook it up to a pair of L100's and go for it...
    bo

    "Indeed, not!!"

  4. #4
    Administrator Mr. Widget's Avatar
    Join Date
    Apr 2003
    Location
    San Francisco
    Posts
    9,735
    Quote Originally Posted by boputnam
    If it cycles through start-up without tripping itself, hook it up to a pair of L100's and go for it...


    If no L100s are available I suppose any Bose product would be acceptable.


    Widget

  5. #5
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Quote Originally Posted by Mr. Widget
    If no L100s are available I suppose any Bose product would be acceptable.
    There's always L100's available...
    bo

    "Indeed, not!!"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. tube bi amp 250ti advise
    By gerard in forum Professional Amps
    Replies: 2
    Last Post: 10-16-2005, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •