The duct dimensions are on the site, just need to dig deeper.
Allan.
Hi, not sure where it is but I have it here. PM me with your email and I will send it to you.
Allan.
Hi Allanvh5150,
Many thanks for the data You have shown to us.
May it would be good that such figure would be put with the other 4355 plan data.
http://www.audioheritage.org/vbullet...nclosure-Plans
I think that Robh3606 [ http://www.audioheritage.org/vbullet...hp?23-Robh3606 ] can help.
Regards
Ivica
Hello guys, I have read about few people here with great skills making charged crossovers for the 4350 4355 monitors after so much effort I finally got all the components and I'm building my own cabs could you please refer me to someone that can build me a pair of crossovers.? Please let me know, thank you soo very much in advance
Since I can't find it in those beautiful drawings: Side panels, top and bottom are 1" thick, correct?
I built mine some 20 years ago, in an entirely different vertical enclosure, the crossovers are stock 3107’s. I do not know or understand much about charged crossovers but if they offer any audible quality improvement then I am willing to try a pair on my DIY 4350’s as well.
Vahe
I there, I'm trying to get in touch with Rick. Could you help me?
thank you.
christophe
The drawing is to scale. Print it out and do some measurements.
Allan.
Is there any possibility that he still has some of the fabricated tubes left ? I know this is an old thread. Thanks, Jay
Even if you build with drawings of orignal cabinet there will be slight variations in volume. For exact tuning, you need to make measurements after everything is installed.
The drawing posted above can be used as a good start, make one of the legs longer than the drawing so it can be cut to the appropriate length.
There is a lot of info for tuning on the web
Be happy you chose 4355, in 4350 you have 6 tubes to work with.
43XX (2235-2123-2450-2405-CC 3155)5235-4412-4406-4401-L250-18Ti-L40-S109 Aquarius lV-C38 (030) 305P MkII
There are currently 1 users browsing this thread. (0 members and 1 guests)