4355 Monitor Plans

[ivica]

I was a bit confused when i saw the video, KenrickSound seems to be making quality work, but still they use cheap particle board. What material did Jbl use for the original 4355 ?

Baffel seems to be very thin compared to modern speakers.

Hi,
I think if using proper bracing and correct absorbing material, and original drivers, the rest would be less important...

regards
ivica

[Challenger604]

You seem to have some kind of attitude problem or just a bad day ?

Not at all dude! I don't know what you are doing here! This blog is not about expensive plastic speakers.

Move along...

[berga12]

I saw a video from Kenrick Sound, i believe they use particleboard for the sides/top/bottom. Is the front and back birch ply 3/4" ?

Yes Kenrick is using Particle board for the Outher and back, than using Plywood (not birch! I guess Fenolic or something cheaper....) and inside brace is made by solid Fir or similar (not solid birch)

than they walnut veneer and walnut solid for the front shape.

most DIY project use full Plywood, birch or not, and inside Solid wood. (here on the forum some used particle board...)

I used full birch plywood 1" for every side and interior(let say 24mm, we don't have 1" in Europe), only the 2202 box is 3/4" (or 18mm in my case)

I don't like MDF and Particle board.

[f76franco]

donde puedo obtener el diagrama electrico de estos monitores, o donde se pueden comprar?

[dn92]

donde puedo obtener el diagrama electrico de estos monitores, o donde se pueden comprar?

Despite the fact that there are many spanish speakers in the World, I'm not able to understand. Even if there are not working well with latin based languages you can try automatic translation tools:

Where I can obtain the electrical graph of these monitors, or where they can be bought?


You'll find it somewhere in this forum.

May I also use my native language

[berga12]

donde puedo obtener el diagrama electrico de estos monitores, o donde se pueden comprar?

Estan aquì:
http://www.audioheritage.org/vbullet...re-Plans/page2

Equal crossover type1:
http://www.audioheritage.org/vbullet...1&d=1063439339

Equal charge coupled crossover type2:
http://www.audioheritage.org/vbullet...1&d=1280446056

[Challenger604]

Howdy all!!??

Sorry! You will never see a CC with me!

This is part one of three croosover for 4344’s!

Cheers to that!