Results 1 to 11 of 11

Thread: 2123 vs 2012

  1. #1
    dennis j leisz
    Guest

    2123 vs 2012

    I've started a new 4 way project and I am evaluating the mid bass options. I own a pair of both 2123h and 2012h 10" drivers. I plan to use the 2245 on the low end and cross the 10' over to the 2450H mounted on the 2380A horn. I do not have any experience with the 2012. Any recommendations? The application is Music reproduction in a large living room.

  2. #2
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109

    2012 or 2123 ?

    Hi Dennis

    Interesting dilemma you have. The easy answer is to listen to both in .25 to .5 cu' sealed boxes and choose the one you prefer the sound of. I think you'll find that both present some challenges in crossover design if you are going to pick a point above 800 hz when passively crossing into your 2450 driver.

    I just swapped a 2012h into a .625 cu' box that was holding a 2123h ( previously occupied by a le10h-1 ) . The first thing I had to do was to replace the inline 8 ohm resistor with one of 4 ohms - this is a quick fudge to offer some level matching to my le14 woofer. This necessity is caused by either different AC impedances or different sensitivity(s) within the realized operating range ( 40 hz to 750 hz ).

    Briefly; I have to say I prefer the 2012. It has a little more apparent lower midbass than the 2123 ( below 300 hz ). The lower mid reminded me a bit more of what one gets from a 2202. It's hard to say if it offers any better resolution - I did think it presented a bit more - but that could be wishful thinking . I need to sit with it for some more time . My midbass is paralled with my woofer so some sonic signatures will get averaged-out by the fact that the le14h covers most of the same range.

    regards <> Earl K

  3. #3
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    That poor little LE10H-1 stuffed into that tiny box <weeping face icon inserted here>

  4. #4
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109
    Well you know - if you love something - set it free .

    It's now on vacation - gone back to its wolf pack of le10s to hang out for a while .

    Earl K

  5. #5
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142

    Re: 2012 or 2123 ?

    Originally posted by Earl K
    I just swapped a 2012h into a .625 cu' box that was holding a 2123h ( previously occupied by a le10h-1 ).
    Hey, Earl...

    You got me. And, so did the syntax... So, are you comparing to the 2123H, or the LE10H-1...? Me thinks it's to the 2123H...

    If so, and regardless (how's that for Friday syntax... ), could you provide perspective on the LE10H-1 in that application, or shall we guess it was surpassed by the 2123H (and thus, estwhile...). I've long wondered about stuffing an LE10H into that place.

    Originally posted by Giskard
    That poor little LE10H-1 stuffed into that tiny box <weeping face icon inserted here>
    That's what I was thinking...



    Thanks!
    bo

    "Indeed, not!!"

  6. #6
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    Eeeew! No! Don't use LE10H's in place of your 2122H's Bo! What is wrong with your 2122H's?

  7. #7
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193
    What are you doing with all the LE10H's Earl?
    I have a little wolf pack myself, lol.

  8. #8
    Senior Seņor boputnam's Avatar
    Join Date
    Apr 2003
    Location
    northern california
    Posts
    6,142
    Originally posted by Giskard
    Eeeew! No! Don't use LE10H's in place of your 2122H's Bo! What is wrong with your 2122H's?
    Have no fear, friend. Not a chance of me doing ANYTHING to the 4345's... Ever.

    Just curious, being a big fan of the 4313B's , what the LE10H sounds like crammed in that little doghouse? <wagging pooch icon inserted here>
    bo

    "Indeed, not!!"

  9. #9
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109

    Yes, the comparison is; 2123h to 2012h

    Oh Lord - Syntax

    You know , I have parts of my brain that are just too multicultural - and they've just never properly learned to speak even one language . How many generations does this take ?

    Anyways, I like the le10 woofs as midbass devices. LOUD is 90 db and my home system stuff is just never used that way. I played Hendrix in bands ( decades ago ) so I've put in my time for LOUD ( good thing my amps were usually aimed at others ).

    Bo ; try it and listen to it - just don't try to match it up with some big thing like your 2245(s). Afterall, it is a fairly low efficiency transducer.

    regards <> Earl K

  10. #10
    Senior Member
    Join Date
    Apr 2003
    Location
    GTA, Ont.
    Posts
    5,109

    Wolf Packs

    Hi Giskard

    My cache of multiple le10 (a)(h-1) ( & a single Jolson ) were accumulated for K2 inspired mini 10" versions. Then I collected le14 (a & h ) for essentially the same function. Now they all have to learn to play nice together since I presently use 1 of each in my quasi MTM setup . Long term plans for the whole lot aren't determined - likely project speakers as gifts for the rest of the family.

    What are your plans for the pack ?

    <> Earl K

  11. #11
    Obsolete
    Join Date
    Apr 2003
    Location
    NLA
    Posts
    12,193

    Re: Wolf Packs

    I'm not sure...
    Maybe L96/4313B hybrids in 5.1 surround?
    Maybe just throw them all in the trashcan and uncomplicate my life?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2123H vs 2122H in a 4343 monitor
    By subwoof in forum Lansing Product Technical Help
    Replies: 87
    Last Post: 11-24-2006, 08:30 PM
  2. Recone le10 to 2123 - le15 to xxxx ?
    By gerard in forum Lansing Product Technical Help
    Replies: 12
    Last Post: 11-07-2004, 04:12 PM
  3. OK make 2012 out of a LE10 was a bad idea, but if...
    By Flodstroem in forum Lansing Product Technical Help
    Replies: 4
    Last Post: 05-19-2004, 03:13 PM
  4. Horn loading a 10" 2123
    By Mike C in forum Lansing Product General Information
    Replies: 2
    Last Post: 01-02-2004, 02:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •