Hello Zilch
You could but a half dozen systems in that cabinet. Depends on the woofer installed as you know.
Hello Peter
Is that a 12V active crossover??? What slopes?? High and low pass ?? You should be able to drop the crossover in between the amps after the preamp just like the 5234 you plan on using. With 100Hz crossover and those woofers in phase you are going to have a good amount of coupling going on if they are staked or close enough to each other. You get coupling and boost around 100Hz and it certainly does muddy things up a bit especially if the crossover doesn't roll off the midbass box. Where does your 100Hz box roll off??? Is the box good to say 60Hz or so?? Where is the F3??? With room loading you may be getting a significant amount of additional extension from that box even if sealed. 12dB could do it, you can certainly try I would look for a set of 18Db cards if the 12dB doesn't work. I know it didn't work for me in my application I ended up using a 24Db network. How are you setting this all up?? You have something to measure it with???
Rob