Page 1 of 4 123 ... LastLast
Results 1 to 15 of 51

Thread: Venting Voice coils

  1. #1
    Junior Member
    Join Date
    Jan 2005
    Location
    southern ontario
    Posts
    29

    Venting Voice coils

    For you reconers That ocasionally have to use aftermarket voice coils, what is the best way you have found to vent them?

  2. #2
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    I usually don't, but if you must....slip the VC over a wooden dowel or some other cylinder, shimmed snugly. Use a leather punch and hammer to make your vent hole. Good luck. Your cylinder needs to be solid enough to take a hammer strike without going out of round.

    I think you get the idea. Maybe you could come up with your own, better solution if that one doesn't suit you.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  3. #3
    Junior Member
    Join Date
    Jan 2005
    Location
    southern ontario
    Posts
    29
    Thanks Edgewownd, I don't feel comfortable about doing, even with a new paper punch!

  4. #4
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    You're welcome Jaybird.

    Don't use a paper punch...it'll just screw up the VC former. It can't punch without distorting the collar....that's why you need to back it up with some sort of die.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  5. #5
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    There is no other way.

  6. #6
    Maron Horonzakz
    Guest
    Yes there is !!!!!!!

  7. #7
    Senior Member Guido's Avatar
    Join Date
    Apr 2003
    Location
    Germany
    Posts
    2,503
    Really ?

  8. #8
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Maron Horonzakz
    Yes there is !!!!!!!
    So why don't you enlighten us, so we will be better humans?

    (Frankly...I don't give a sh**)
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  9. #9
    Maron Horonzakz
    Guest
    What did they do before you were born?

  10. #10
    RIP 2010 scott fitlin's Avatar
    Join Date
    Apr 2003
    Location
    Brooklyn NY
    Posts
    4,343
    Before this turns into war, lets not call each other names.

    FWIW, I wouldnt attempt to ventilate a VC former myself, maybe a skilled reconer should do this as you are doing something the manufacturer didnt.
    scottyj

  11. #11
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Maron Horonzakz
    What a stupid suggestion
    Quote Originally Posted by Maron Horonzakz
    What did they do before you were born?
    Well Scotty...for some unknown reason... Mr. Maron has decided to turn this into a war, with his unfounded "stupid" remark....that he so conveniently deleted...and then his last quoted comment. Maybe he could explain the need to be a jerk...or maybe he can't explain and it just comes naturally. Some people can't help themselves...I'll say a prayer for him.
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  12. #12
    Maron Horonzakz
    Guest
    Edgewound your all wound up. Take your medication & calm down. There is a solution. Go through your Voice Coil mags its in there. You want me to do your home work too? Dont be so thin skinned. A little more study & you can graduate from speaker school.

  13. #13
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Maron Horonzakz
    Edgewound your all wound up. Take your medication & calm down. There is a solution. Go through your Voice Coil mags its in there. You want me to do your home work too? Dont be so thin skinned. A little more study & you can graduate from speaker school.
    Seems to me you forgot your meds today, Maron. I'm fine....What's your problem?

    Well...I've tried to refrain...but it's awfully difficult to let you get away with it. My skin is thick enough....you're just an *******....and you asked for that.
    Last edited by DRG; 04-26-2006 at 10:08 AM. Reason: Profanity
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

  14. #14
    Maron Horonzakz
    Guest
    Edgewound....I,m fine too.....But there is a solution to cooling that VC.....THINK....And stop Huffing around.

  15. #15
    Senior Member edgewound's Avatar
    Join Date
    Jun 2005
    Location
    Southern California
    Posts
    2,776
    Quote Originally Posted by Maron Horonzakz
    Edgewound....I,m fine too.....But there is a solution to cooling that VC.....THINK....And stop Huffing around.
    What does Arianna Huffington have to do with it?
    Edgewound...JBL Pro Authorized...since 1988
    Upland Loudspeaker Service, Upland, CA

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. venting voice coils
    By jaybird in forum Lansing Product Technical Help
    Replies: 2
    Last Post: 04-25-2006, 08:44 AM
  2. powderized voice coil wires
    By Krischu in forum Lansing Product Technical Help
    Replies: 5
    Last Post: 01-08-2006, 07:56 AM
  3. What is AWG of voice coil ???
    By B&KMan in forum Lansing Product Technical Help
    Replies: 10
    Last Post: 05-10-2005, 10:31 AM
  4. 12" driver voice coils?
    By johnaec in forum Lansing Product General Information
    Replies: 11
    Last Post: 09-18-2004, 10:28 AM
  5. Voice coil dynamic operating temperatures
    By Charley Rummel in forum Lansing Product General Information
    Replies: 1
    Last Post: 09-02-2004, 08:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •