I just purchased a set of drivers and need some advice on building a pair of large monitors.

The list of drivers is:
2245H 18” woofer
2202H 12” midbase
2445J 2” compression driver
2405H tweeter

All the drivers are in good shape. I need to replace the foam on the 2245H, and I’m pretty sure the diaphragms on the 2445J are titanium, not sure if that is original on this driver.
I placed the 2202H drivers in my 120Tis for a quick try out and I really liked their impact on kick drums and the like.
Here is the question:
Should I piece together the remaining parts of a 4344 and build one of these, or put together a 4344/4350 hybrid using the 18” woofer, larger midbase and 2445 mated to a smith horn? A stock 4350 would be too large.
Either way the bottom end would be bi-amped.