I'm ready to cut wood but want to get some opinions on how these drivers will play together.
I have two E120H 12" drivers and want to put them in two boxes with 15 deg adjoining walls so that they intersect at a 30 deg angle (splayed out). One will point straight forward and the other will toe in to center at 30 deg. Their edges will be 3 1/2" in from the edge of each box, about 7" apart.
The purpose behind this is to match the dispersion pattern of the 2346 Everest horns for the front of my HT system. I am going to use 2405H slots mounted next to the horn ala Everest and two 2226H drivers below the 12"s in the same configuration as the 12"s.
Should I take some medication to clear up my thinking or am I on track?
I would love to hear input from any of our esteemed members.
TIA,
Don M