Search:

Type: Posts; User: robertg; Keyword(s):

Page 1 of 9 1 2 3 4

Search: Search took 0.06 seconds.

  1. I have no problem finding butcher block, I just...

    I have no problem finding butcher block, I just want some for really cheap. Usually counter top manufacturers have some cut-offs, or maybe I can find a couple of used restaurant for a good price. If...
  2. Thatís probably what I will do. Iím looking for a...

    Thatís probably what I will do. Iím looking for a nice piece of butcher block to mount wheels to.
  3. Mike I understand it by the way you explained it....

    Mike I understand it by the way you explained it.

    I did some measurements today with REW. I put the microphone in five different places. That program is a little too advanced for me, but I can...
  4. I tried this and I like it so far. I had to turn...

    I tried this and I like it so far. I had to turn down the 2245's amp slightly. I think I will have a bit of time in the next few weeks to play with this. I left the woofer high pass in there for now.
  5. So underlapping crossover frequencies would mean...

    So underlapping crossover frequencies would mean kind of leaving a hole between frequencies? Instead of using 300 hz use 290 and 310?
  6. I'm using an Xilica XP4080 crossover, the high...

    I'm using an Xilica XP4080 crossover, the high pass is at 40 Hz and 6 db per octave.
  7. I bought this CD off eBay last week, but I don't...

    I bought this CD off eBay last week, but I don't have it yet. I remember a friend saying this song has good bass. I never thought I would ever buy a MJ CD, I never was a fan of that type of music.
  8. So I changed the crossovers to 24db LR and tried...

    So I changed the crossovers to 24db LR and tried a different amp and they have a lot more punch. The amp is a Crest 7001 and has about 550w, the Ramsa had 350w. My next step is to raise them off the...
  9. Replies
    8
    Views
    563

    You can copy this 4647A box. ...

    You can copy this 4647A box.

    http://www.jblproservice.com/pdf/Theatre%20Series/4647A.pdf
  10. The horns are 6 ft apart. I have a couch in the...

    The horns are 6 ft apart. I have a couch in the room also, so moving closer to the speakers would be difficult I want to keep the couch as far from the speakers as possible. I still like the idea of...
  11. Thanks, lots to work with here. The...

    Thanks, lots to work with here.

    The measurements were taken about 13' from the speakers very close to my sitting position. I used REW and it is a sine wave sweep from what I know. I just used the...
  12. My 15" woofers did sit about six inches higher in...

    My 15" woofers did sit about six inches higher in the cabinets than these. I'm going to try to make a pair of stands to raise them.

    As Mr Widget said, these definitely have more finesse than the...
  13. This is a sweep with everything hooked up...

    This is a sweep with everything hooked up correctly. I think it looks right, the blue is both speakers. I turned up the gain on the bottom amp so it is higher up to the first crossover point. I think...
  14. That's with one of the woofer cables reversed. I...

    That's with one of the woofer cables reversed. I was expecting a graph like that.

    I'll have to pull one of the woofers and take a picture of the back side.
  15. I will have to check my box tuning next. I...

    I will have to check my box tuning next. I followed the plans here closely, so I doubt if my tuning is wrong. I did change the opening to my ports by rounding them slightly. here is a picture of the...
  16. My first step was to reverse the wires to the...

    My first step was to reverse the wires to the woofers and take a measurement. My ears couldn't hear a major difference but using my REW program I came up with this. Now they are out of phase. Green...
  17. I am crossed over to a 2123 at about 250 Hz right...

    I am crossed over to a 2123 at about 250 Hz right now. I've tried anywhere from 150 Hz to 300 Hz, I have an Xilica XP4080 active crossover. The red lights flash on my amp right now when I play it...
  18. Looking For More Punch From My 2245, 4345 Clone

    I'm trying to get more punch or kick out of a 2245. The system that I had before my 4345 clones had dual 15" 2226 drivers. It had some serious kick.

    My amp is a RAMSA WP9440 with 350 watts, I'm...
  19. Replies
    57
    Views
    36,902

    Here's an actual picture of baritones blue. I...

    Here's an actual picture of baritones blue. I used automotive rock guard and covered with a simulated stone paint from Home Depot. I just rolled the blue over it.

    85815[/ATTACH[ATTACH]85817
  20. Replies
    57
    Views
    36,902

    This works also. 85814

    This works also.

    85814
  21. Replies
    4
    Views
    437

    I was going to make a pair so I saved pictures. I...

    I was going to make a pair so I saved pictures. I don't have any measurements though. If you search someone here made a really nice pair quite a few years ago.
  22. Replies
    6
    Views
    563

    I always thought N2400 was 2400 Hz, N2600 was...

    I always thought N2400 was 2400 Hz, N2600 was 2600 Hz, and N7000 was 7000 Hz? They didn't cut it at those frequencies, they brought it in. They were high pass filters.
  23. I don't have any left.

    I don't have any left.
  24. From what I have read here they are all 12 ohms,...

    From what I have read here they are all 12 ohms, but some are marked 8 and some are marked 16. I recently sold some complete pairs of 2402 bullets on Canuck Audio, I think I got $225.00 CDN for a...
  25. Replies
    2
    Views
    466

    Also there is a Russian, s_p_a_x on eBay selling...

    Also there is a Russian, s_p_a_x on eBay selling 4345 badges. I bought my knobs from him, but he didn't have any badges when I was in the market for them.
Results 1 to 25 of 210
Page 1 of 9 1 2 3 4