Search:

Thanks for the data. Time to formulate a plan.

Can someone tell me the distances between the drivers in a L65 cabinet? I’m looking for these:
D (mid to woofer)
D (mid to baffle edge)
D (tweet to mid)
D (mid to top), oops forgot to draw.

i...

Whoa! That’s grander than I imagined. I LIKE IT! So y’all are suggesting I place a 100Hz high pass filter prior to the L96 network? Ok.

is there a minimum baffle size/area needed for drivers? ...

I do have a pair. I think the cab volume would be enormous, the sensivity too high and they are subs. I was looking at LE14s thinking they might work or try to pull the 128s out of my L112s or the...

Change 4343 to 4315. Incorrect similar to comparison.

I was just listening to my L96s wondering if they could morph into something resembling (a stretch) 4343Bs. All L96 drivers are repurposed with the LE10s in a 0.5 cu ft box for mid bass. What would...

Sounds like a plan.

I also have baskets for a pair of 2225s. No issues reconing to 2225Hs. And another pair of E-155s that would likely get reconed to 2245Hs.

It is amazing the amount of...

It's been a decade (?) but trying to restart some old projects. I found these in the attic and scanned through a variety of threads but it appears as though the C8RK145 recone kit is obsolete.
...

Typically horns have curved flares and slanted sides. Does it matter if the flare (curve) is horizontal or vertical? Midbass horns (45XX) have their flares running vertical whereas CD horns have the...

This mockup brought to you by double sided tape. The sides will be cut down and most likely curved. The throat adapter with drivers mounts vertically behind the horn. The second pic is of the tweeter...

The tractrix horn flare is cut for the dual LE5. I also cut a 1 inch throat x 1200 Hz cutoff tweeter tractrix flare. I was thinking of adding a 2407 on top but am now wondering about the 053Ti...

Progress through the weekend. Done for now.

I stole an hour and shaped the octagons.

Well even if it's an exercise in futility it's a learning opportunity. Horn flares cut. Throat taking shape. Decided to try and make a tiny tweeter horn and mount on top similar to a SAM1HF. 80 cubic...

Dual drivers in a tractrix horn - quasi Array series mid horn. I see a ton of L100 and L100T parts. Partial design is to mount my L150 drivers in a V shaped baffle similar to the Everest II.
...

There are well documented projects and crossovers for the LE 5 series drivers but has anyone ever tried or know how to mod a crossover for LE 5s in parallel? Tweak 3113B (or L-150A-B) network for...

:jawdrop: I now know that I know nothing.

I will now take my book and sit in the back of the class and do my reading assignments. :slink:

I won't even try an enclosure for E-155s. ...

I've searched though I'm not sure enough but I just can't find the answer. MI drivers are made for music production and not really for music reproduction.

1) The magnet structure and frame are...

Does anyone know the difference between these CDs: 2431H and 2432H.

Gary

Nearing the end of questions. Thanks for the feedback.

Regarding Rob's post on the 12" x 12" baffle for the horn/lens setup, does the baffle have to be flat or square with the mouth of the horn...

Thanks for correcting the previous submission. That saves me building a bunch of bracketry to mount the drivers and lens. Upon first read I thought it was for the larger horn with a lower cutoff. ...

Thanks. The mouth of the horn is approx 4" in diameter. If I operate the horn at or above the lowest freq of the horn and can hang the horn in free space , why is the lens (2308/L91) 10 " wide? ...

If building a DIY 4345 with a 2426 and 2405 exposed/not housed with the woofer cabinet, how wide would the high (2426) baffle board need to be for adequate frequency dispersion? The lens is 10" wide...

What are likely candidates to use as substitutes for either the 112s or 2108s in today's market? Is going up to a 212X too much? The M209 is an 8" driver but doesn't get much exposure.

Gary

Nice way to speed up construction.