I always wanted a pair of piano black 250ti's, and a pair came up 4 years ago in Minnesota. I n perfect condition for 3k, so I drove 1,200 miles to pick them up. They sure can handle lots of power...
Type: Posts; User: sweet212; Keyword(s):
I always wanted a pair of piano black 250ti's, and a pair came up 4 years ago in Minnesota. I n perfect condition for 3k, so I drove 1,200 miles to pick them up. They sure can handle lots of power...
I intend to box up my 250ti's, return to and unbox my old 1400's. I prefer the admittedly less efficient but more polite sound of the 1400's.
The 1400's do have a subdued top end, exacerbated by...
I've owned 4350's and now own the 250ti's and 1400's.
The 4350's were loud and dynamic but that's about all I could say that is positive. The 250ti's are just OK great dynamics, plenty of slam....
$75 - very reasonable thanks Malefoda and Robh.
What about software? What is the most economical and use-able software?
Yes thanks Opimax and Robh.
I changed the connections to the drivers according to the resistance through the crossovers but that was not conclusive as the resistance was almost exactly the same....
I resurrected this thread to let you know the results.
I have been very busy but my 250ti's are finally back together.
Re-foaming the 035's was easy. The tweeters are now less prominent -...
I replaced the crossovers caps in my old L212's many years ago with Solens. The difference was well worth it IMO - sounded so much better.
Someone has messed around with the terminals. The black stripe lead with female spade terminal connects to the positive (+) speaker connection. This means the tweeter is in anti-phase - unless the...
The sub woofer amp in my old 212"s died. I had them repaired it was the power supply capacitors that blew.
Thinking back now I should have replaced them with higher rated capacity capacitors....
I'm still waiting for the foam to come in the post but it should be easy enough to put back together. Would be worth your while to refoam your 044's. I'll let you know how different or not my 250ti's...
Thank you RD.
Having bought these speakers a year ago and noticed someone has worked on them. I checked the polarity of the tweeter with the wiring diagram. Sure enough, whoever worked on them connected the black...
Thank you Malefoda.
Your story gives me more confidence.
Looking at the domes today I was surprised that there is no spider kind of suspension for the domes. As compared with lower frequency...
Thanks for your replies. The maker of the replacement foam says the foam should made hemispherical to match the shape of the dome and about 10mm thick. OK that will definitely touch. Too much contact...
Well these 035TIA's came apart very easily. The grilles prized off with a ball point pen and the 4 screws were a snack.
They look to my untrained eyes to be in great condition. The foam is 22 x...
Thank you both. This is not an easy job especially for a ham fisted and impatient one as myself.
The best course is perhaps to buy some renovated 035ti's. The terminals are in a different...
Unscrewed the tweeters - they are 035tia's. For some unknown reason the authorized JBL service center will not recondition these speakers - 035ti's yes but not the 035tia's. What can the difference...
Thank you RD. When you say reproductions - you mean copies of the tweeter by 3rd parties? I had a look at the boxes - they are "Classics" and also marked BQRC or BGRC - hard to read.
Would...
Thanks for your reply. I will take your advice.
I think these have the 035ti tweeters - could be wrong. Many years ago the Stereo Review article regarding the 250ti's raved about how sweet the...
Hi Everyone.
I have a pair of 250ti's - the later gloss black early 90's versions.
They sound great except for the top end. The best way to describe it is shreaky/steely - particularly on...
I connected the woofers directly to the amp and found the basiest music I could find. Surprise! They sound fine - I could not hear any rubbing or other sounds.
When acoustically loaded back in...
Thanks Earl
It seems removing the dust cap and vacuuming out the remains of the filter may work.
Perhaps the best way would be to remove the cone and thoroughly clean and remove all the old...
Thank you Earl
I will read your attachment tomorrow and thanks again.
Cleaning out the old filter material by removing the dust cap would need replacing the whole cone - I assume. These old...
I had a JBL authorized dealer re-foam the woofers and picked them up yesterday. Connected a signal generator before reinstalling them to test them. At low frequencies below 30 hz where the cone is...
Is there a spam problem?
I have been reading this marvelous site for many years and have not noticed any. Please give examples.