Search:

Type: Posts; User: jbl4ever; Keyword(s):

Page 1 of 12 1 2 3 4

Search: Search took 0.28 seconds.

  1. Thread: Jbl hl180f?

    by jbl4ever
    Replies
    1
    Views
    54

    Hi Eric, if I recall the driver you are speaking...

    Hi Eric, if I recall the driver you are speaking of is a home version of JBL's pro version 2460/61
    Claimed response of 500Hz to 8 to 10Khz. These would most likely be used in systems with the lower...
  2. Replies
    9
    Views
    587

    Send me a PM, I have extras you can have

    Send me a PM, I have extras you can have
  3. Replies
    20
    Views
    1,739

    Hello Dr db, I listen to this unit about 3months...

    Hello Dr db, I listen to this unit about 3months ago at someones house. A little sleeper from your neck of the woods Germany. It is a great unit and sounds very smooth with plenty of power. Try to...
  4. Hello and welcome to the Lansing Heritage site. I...

    Hello and welcome to the Lansing Heritage site. I do not know if you could call it a improvement on the 4331a's using a 2345 horn. Sure the 2345 horn loads down to 800Hz but is more of a medium throw...
  5. Thread: Woofer Clamps

    by jbl4ever
    Replies
    19
    Views
    2,352

    No wonder someone invented the nuts you show. No...

    No wonder someone invented the nuts you show. No more T-nut legs bending when hammered into harder wood.

    I found using a large C clamp and some card stock on the baffle face sets the T-nuts quite...
  6. Thread: 4641 vs 4645c

    by jbl4ever
    Replies
    9
    Views
    909

    Yes, just different woofer. Both tuned to 25Hz...

    Yes, just different woofer. Both tuned to 25Hz
    https://www.jblpro.com/ProductAttachments/4641.pdf
    https://www.jblpro.com/ProductAttachments/4645C%20Spec%20Sheet.pdf
  7. Replies
    13
    Views
    1,373

    Do you still have the metal brackets that came...

    Do you still have the metal brackets that came with the speakers. It was used to support the LE85 to the H91 horn and was screwed to the brace in the cabinet. If so maybe you could reuse them or use...
  8. Replies
    0
    Views
    580

    Working voltage

    I cannot remember the smallest required voltages for the cards on the 52XX- 5235. Were they 63VDC and above for the capacitors. I am trying to make up the ultra high frequency cards for the 4350's...
  9. Replies
    9
    Views
    1,637

    I have both 2425H and J's. The H's read like 3.6...

    I have both 2425H and J's. The H's read like 3.6 to 3.9 on DCR and 6.1+ on the J's. Possible that someone changed the diaphragm. Take the 3 screws out of the back carefully take the cap off. Now look...
  10. Replies
    5
    Views
    1,399

    For a passive crossover look at the 3110A a 800hz...

    For a passive crossover look at the 3110A a 800hz with Equalization for your horns. 8 ohm low freq and 16 ohm high freq.
  11. Replies
    4
    Views
    815

    Of the 4 pairs I had new from JBL out of the box...

    Of the 4 pairs I had new from JBL out of the box none had any gaskets between the throat and the horn. They will be fine the way they were designed
  12. Replies
    11
    Views
    1,496

    Hello back at you. What is the crossover...

    Hello back at you. What is the crossover frequency you are going to use between the 2202 and the 2245. In the 4350 and 4355 models the 2202 crossed over at 250 and 290hz. The enclosure was under 2cu...
  13. Replies
    16
    Views
    2,548

    Hello Amon and welcome to the LH site. For the...

    Hello Amon and welcome to the LH site. For the 2309/2310 horn assembly to work properly it needs a baffle for it to mount on. Jbl made a mounting kit years ago, i believe it was a MA15. You can make...
  14. Replies
    2
    Views
    820

    Hello Drugolf you will not hurt them. It looks...

    Hello Drugolf you will not hurt them. It looks like you might have some dust bunnies down in the throat.
    Also the protective screen looks like it might be damaged a little. You might find out that...
  15. Replies
    4
    Views
    804

    Thank you everyone for your response,:) and to...

    Thank you everyone for your response,:) and to Earl K for posting them in English:D. Component value for R5 was 243K for the 500Hz card. Thanks again
  16. Replies
    4
    Views
    804

    Value on 51-5232 Card

    Hello does anyone have the R5 value on this card. It looks like 343K but not sure. The card is a 500 Hz
    CCBREQ 18 db/w H.F. EQ for 2360 series horns. Thanks
  17. Replies
    27
    Views
    7,231

    Nice little Class A amps....

    Nice little Class A amps.
    http://www.monarchy-audio.com/SE100_MK2_Main_Frame.htm
  18. Replies
    5
    Views
    1,191

    2 ports with a diameter of 4-1/8" and a length of...

    2 ports with a diameter of 4-1/8" and a length of 10-1/2" total including the baffle :)
  19. Replies
    15
    Views
    1,887

    Arne, the 2205 and 2225 work fine in either 4530...

    Arne, the 2205 and 2225 work fine in either 4530 or 4520's. The 2220's not enough for any bottom end. Never tried the E140'S. Easy to find components over their maybe the 2225H, 3110A, 2370, 2426J...
  20. Yes on the 2220 speakers they are great for...

    Yes on the 2220 speakers they are great for midbass. Maybe find the 2382 horn 120x40
  21. Hello, looking at the JBL library it appears the...

    Hello, looking at the JBL library it appears the vertical style stopped in 1969 and in 1970 the square ones started. Hope this helps:)
  22. Hi Nik send those franken speakers back to the...

    Hi Nik send those franken speakers back to the seller and leave him some negative. There are plenty of 2405's for sale, you do not need to accept someones attempt to make looking new and a poor job...
  23. Thread: JBL4502 pair

    by jbl4ever
    Replies
    17
    Views
    3,051

    Hello, and welcome to Lansing Heritage. Your...

    Hello, and welcome to Lansing Heritage. Your speakers are enclosed in JBL's 4502 enclosure. The model was called 4320's. Here is the link
    http://www.jblpro.com/pub/obsolete/4320.pdf
    Your speakers...
  24. Replies
    10
    Views
    2,143

    To rephrase Heather, I should have said resonance...

    To rephrase Heather, I should have said resonance nodes. The Altec 511B and 811B horns i believe were plagued by this more so than the JBL 2345. The JBL is a thicker cast than the Altec. I think you...
  25. Replies
    10
    Views
    2,143

    Thank you everyone for the replies. Heather the...

    Thank you everyone for the replies. Heather the 3110A crossover with the high frequency eq does a very good job extending the highs. I think the 2345 horn is better than the Altec 811 it does not...
Results 1 to 25 of 285
Page 1 of 12 1 2 3 4