Search:

Hallo!

I have Crown XLS2002 and tested on 4365, 4429, and JRX225 with great result. As you all said, the fan can't be heard even when driven hard. Great amp for hifi....

Ok, I have been thinking.

We have to know for certain that it is the humidity in a room or a warehouse where the speakers are stored that is the culprit to the problem. There must be more...

I am not gonna open mine, don't have any moisture in my room. As long it's sounds fine I am not gonna bother with this issue. Maybe in 10 years:)

Looks good to me!

I can agree that moisture can be a problem.

It looks nice and the cables seems to be as Martin wu's picture regarding the faston. My wrong here, Sorry Martin!!

But your cable attaching to the diafragman looks different. Flat wire contra...

Remove the back access panel.

Disconnect the wires.

There are two screws on the horn and two on the bottom where the L-shape plate is. Remove this. Take care of the gasket.

Remove all this,...

Ok, I do belive you, But, that cable can't be made from factory. Looks strange, I would be very suspicious.

In the picture from hifishock posted by Earl k the text on the tranceducer is differen't from martin wu's picture.

Ok, understand

What about the wire cable?

Thanks, great pictures, excactly what I mean about the cables.

In the first picture where one can see the cable(negative wire) there is a faston connection. Can this be right, I thought it schould be soldered. The tiny cables looks strange as well, compare to...

If you are using the passive x-over there is no settings in dbx260 for EQ-ing.

In dbx260 there is settings for both 4675C-4LF and 4675C-8LF in bi-amp mode.

http://www.jblpro.com/ProductAttachments/JBL_TechNote_DangerLowPower.pdf

Hallo!

I would go with an amplifier rated at 1200Watts for those spekers. Reason, it is very power hungry bass and you need that. The cross-over will handle the power.

My twin brother have...

Hallo!

I have tried with number 2, it's ok, but I don't need it.

I don't have any combfiltering and it sounds better without this PEQ in my room...:)

For the moment I am driving my 4365...

Hallo!

I don't have listening to that particular speaker but to me one MC275 in stereo mode connected to 16ohm tap is more than enough to drive the jbl 4320.

A MC601 is "overkill" for those...

Hallo!

One thing I have notice is that 4429 needs more power to sing and the bass performance to be good. As other has said, including me, many times that room acoustics plays an important role. I...

Hallo!

For me, it took a couple of day's to break in the speakers. Played very loud with good bass content. I am not so into this "break in" thing fhenomena. Yes true, all mechanical movement has...

One can see in the White Paper of 4367 the difference adjustment in freq level in HF and UHF. Seems to work fine.

True, depends how hard you push it, running in low/high volume differ.

To me, I trust the back panel saying "Impedance 8 ohm" on 4367.

On my 4429 it say on the back panel "Impedance 6 ohm",...

Hallo!

On the specs it say "Nominal Impedance 6 ohms" and on the backpanel it only say's "Impedance 8 ohm".

If I where you I would connect it at the 8 ohm tap on your McIntosh, the amp will run...

What I meant was I have never listen to 4367, my post has been edit.

Hallo!

I still have my 4365, never listen to 4367. I don't have any problem with the bass performance. I also would like to know what's the fuzz about JBL Japanese market.

So what is the...

Hallo!

No problem.

Yes, I am still enjoying and very happy and satisfied with the performance the 4429 gives.