Search:

Funny you mention this; i've made a few filter-boxes that help me in this department; (i actually used these 4312's to test the filter to see if it was as convenient as i've hoped)

Internally,...

And one more!

I'll have a look at what they are tuned to now.

They are nearly finished! i like the combination of the veneer and the blue HPL.

No, it still is an active crossover, even with the passive output-stage.

That's exactly what it is; active uses active components, IC's to boost the level and to amplify, and the passive uses the standard DAC outputs. Active has got volume-control with IR remote control...

That's an upgrade to the outputs only, no volume control. From my best understanding it's a passive component; the active one is capable of pushing out 5V, this passive one removes the opamps in the...

no, it's a kit, made by a Dutch guy; (there is a thorough walk-through manual on the site bellow)

http://www.linearaudio.nl/6chan-1.htm

It's available through Pilgham audio;...

Tiny typo and i get nailed.. Go ahead, blame the foreigner..

for those born after 1957;
http://www.youtube.com/watch?v=mqMf1P8BXMA

It seems that amps with a higher voltage also push out...

Yes, i couldn't agree more. Some amps simple don't push out the low frequencies like it should, while others lack in slew-rate. A bridged amplifier lowers his damping. But the biggest internal...

no, you haven't made an error with the amps. I choose hypex for the reason i wanted to integrate them into the enclosure. There is a lot of options out there for amps, and there is no holy grail in...

have you ever tried the le 'cleach theory on your filters? I'll have a look at the software!

Yikes, about the john mayer record? :)

Thank for the kind words! I guess i could, never considered it though, give me some time to think about it. What is it you need? I could figure out something to help you out.

I couldn't afford these NC400's, perhaps in a later stage, but so far i'm focussing on getting the Behringer up the par with a new clock. The currntly used hypex units perform very, very good as they...

I'm (was) sceptic to this class-d as well. you normally always hear this typical non analogue sound, (heard a NAD set on an audio-show, didn't know it was class D, i asked the 'showmaster' if it was...

Yeah, it passed my by without notice. It's that time of year here. flower By bike, i think you mean motorcycle?

That's a suitable amount of power. :)

Hypex is pretty straight forward stuff;...

That's a nice collection of amps! and sweet BR disk. :)

I've made an active 3-way, with integrated amplifiers. (Hypex) using the DCX2496 with a volume-control kit. It uses a Limmer 042 horn for...

some more;

Thinking about adding a frame to the front, their dimensions look a bit off without the tiny bezel.

here are some pics of the make-over;

That would be an option too, but you would need a passive x-over network for that tweeter. and you can't time-align it to your woofer/mid. (the behringer has an auto time-alignment function, i like...

Governed by the pre; yes, if you use the analogue input and accept the losses. (if you are playing from a CD, you have a DAC in your CD, send it through your analogue volumecontrol, the berhringer...

When i was a 13 year old, i bought a set of the JBL 4311B monitors, which i grew fond of. I bought them with blown mid-ranges and tweeters. Over the years i've reconed their tweeters and their...

For a 4-way setup, you'd need to either use a conventional crossover for the mid/high section or make it entirely active, using 2 dcx2496's.
One 'problem' you need to address; you need a volume...

That's a quick way of changing a cone. It's fair easy to change the design a bit, so the terminals don't have to be wasted either. I wouldn't be surprised if they need to transplant them from the old...

3m scotch brite will give cleaner results than sandpaper!