Search:

Yup I rotated them 90deg and never looked back!
The imaging is so much better it was shocking.
I have the HF drivers to the outside--tried with them on the inside and didn't like it as much.

...

Thats closer than I was going to get w/o your measurements--I was about to scale a picture...lol

Im going to lay them out next week.

Also, ever since your reply to my thread regarding...

The baffle is the same width as the original 4412, so it is going to be a tight fit.
The height however is not the same.
The new enclosures are taller, becouse I needed room bellow the woofer to...

Im going to start the front baffle for my 4412 protect and want to mimic the vertical alignment of the 4410.
Can one of the owners of the 4410, with the vertical alignment, give me the measurements...

[/LIST]


If you get this figured out, I would certainly be interested in seeing the schematic.
BF

After a couple great responses to my previous post, Ive decided to rebuild my 4412 enclosures.
Im probably way in over my head here, but that's how I usually figure things out.
I've decided to...

Thank you Dr E!
Very valuable feedback in your post also.
Although I've seen it 1Mx, the thought of a second port never crossed my mind, not even earlier today when I was trolling the DIY M2...

Thank you you for the response



This could be the deciding factor in box size then--I wanted to reuse the plate holding the tweeter and mid controls and the built in port tube.

I will do...

Good evening guys, first post for me here and I hope its not to much to ask.
As a lot of new members I’m sure, I’ve lurked around a long time.—so long I can no longer find all the info I’m searching...