https://diyaudiostore.com/products/diy-biamp-6-24-crossover
should be interesting
Type: Posts; User: vivaregina; Keyword(s):
https://diyaudiostore.com/products/diy-biamp-6-24-crossover
should be interesting
After so many years of fiddling with the overlapping bass settings...finally I decided to just chop the xo for both woofers...splitting the work load.
This was partly inspired after listening to...
It is a 2 man job in my case.
secret is to undo the top screw last
the bottom will pop out enough for a hold
the 2nd woofer is easier as you can hold it from the inside.
oh...please remember to...
LF1 24db slope
Pole 1 - 88Hz - Q at M
Pole 2 - 88Hz - Q at M
Pole 3 - 106Hz - Q at M
Pole 4 - 106Hz - Q at M
LF2 24db slope
You mean take out the diodes !
In case anyone want to upgrade their network to 67000 as a diy build.
If you keep your original set, you can compare.
Previously I did not match the voltage on the lower woofer to the mid woofer as it was too much bass on 133 and 106. It was on around 50%.
I am trying to match the voltage now, and having tried...
Below is the latest clarification from our man. This is the one you should follow.
For each pole (1 thru 4) there are 2 out settings. On poles 2, 3 and 4, you should select both out positions...
I went for config 1
Pic
For those who have been reducing the output of the lower bass woofer on the Pass xvr1 crossover.... I was forwarded this from the great master.
2nd order. You need to set the second bank of the...
My plastic orange plug inside came loose and it buzzed.
a lick of glue fixed that.
http://www.audiocircle.com/index.php?topic=111425.0
More is more.
met a wonderful chap, Murray, with another pair of everests, hope he will post something here about his set up.
55838
55837
55836
55835
55834
So, here is the Question …
What do you do after climbing the Everest ?
Well, I decided to go deep, deep Ocean, … Ocean Way.
http://oceanwayaudio.com/
I had expected the bass performance of...
55795
The crossover set up is back to the original GT concept of 750Hz fed into the 150Hz cut, so I am running bass output of XVR1 back into input of second XVR1, instead of slave direct from pre amp.
...
an acoustic engineer said I should read more
55544
Kiwame Carbon Film resistor.
The sound is smoother, less nervous around the 2k Hz region.
Previously it was a little more metallic, more glare.
I was skeptical before the change, but I heard it on...
Change value of R8 reisitor from 3 Ohm to 2.7 Ohm to lower the brightness.
As recommended by Mr. G.T.
54734