The 4628 literature says the E145/2118 crossover is 800hz. The nominal impedance of the 2118h is 8 ohms, 5.5 ohms dc, and 6.2 ohms minimum. I cannot calculate a 800 hz crossover with a 13.5 uf...
Type: Posts; User: niconoise; Keyword(s):
The 4628 literature says the E145/2118 crossover is 800hz. The nominal impedance of the 2118h is 8 ohms, 5.5 ohms dc, and 6.2 ohms minimum. I cannot calculate a 800 hz crossover with a 13.5 uf...
For a nominal 8 ohm voice coil with 13.5 uf I get a 1472 hz high pass to the 2118, not 800 as the spec says.
For a 5.5 ohm voice coil (= dc resistance of 2118h) I get a 2141 hz high pass.
Am I...
Were the cabaret cabinets built using nails or steel pins? I have come across some of these in the joints and would like to know if they are part of the standard construction technique. I will try...
These 4628B cabinets appear to be tongue and groove construction.
I wish to confirm that the top and bottom are grooved only. This would mean that if they were not glued, they would lift off the...
I have cabaret 4691b's and was wondering if the Eon (models?) were better. They are certainly lighter. How does the frequency response, dispersion, efficiency, power handling, and reliability...
I'm looking for simple tweaks, and am considering the crossover mod from speaker builder. I would need le25 measurements to redesign the tweeter crossover.
I have le25's in my L100's. I had to replace one, and was wondering about substitutes, if absolutely necessary. Also considering L100 crossover enhancements...
I am looking for performance measurements of the le25 tweeter. I am looking for resistance, inductance, impedance curve, resonant frequency, response, dispersion, etc...I was recently forced to...
I use them for bass guitar. The 4625 has a better high end and efficiency, the 4627 puts out a little more low end. I would like to extend it lower, I might try the port extension. It may be time to...
I believe the port dimensions are standard for all first series cabaret enclosures,
two 4" diameter 5.25" length ports. My 4625's are the same.
I know the 4628 went to 1 larger diameter...
Thanks, I had that, I am looking for a user/owner manual, tweaks and tips, measurements, etc. There is little out there compared to the 4628.
I have one of each, and am looking for any documentation on them.
Thanks,