Search:

Looks good Ian

Our measurements look very similar. I didn't gate my measurements, just used them raw, for the same reason loss of resolution. The smoothing makes it difficult get the transitions...

Give them a call they may have some insight on availability. I wouldn't think they would cancel with the M2 going strong but who knows! For the very least would need spares for warranty repairs. I...

Yes that's correct! Going into the digital realm in LEAP never tried are those boxes individual EQ filters?? Do you have to enter a digital processing limit or is it open ended??

Rob :)

The 2450,51,52,53 SL series are all pretty good. Much cleaner up top. I used the same network configuration optimized for an 8 ohm 2453 SL and it dialed right in. The 2451 SL, except for the bolt...

Hello Scott

Thanks for posting! I hope other users chime in to see what they are actually using with the speakers dialed in. I wanted to like them "flat" but no they needed something off the top...

Hello Ian

That's interesting. When I was doing the compensation on the M2 waveguide I went maximally flat like the M2 with a 1dB step down about 1K. Fixed no tapper per octave. That said I did...

Looking good Ian! Wait till you power them up!!

Rob :)

Nice Ian

One suggestion change your graph scales to cover the area of concern. You can also export in .jpg so you don't have to download to view. Reminds me of the 4367 where they use fixed pads...

Clio Pocket works just fine all my "M2" measurements were done using it. They have updated it 3 time since I have owned it. It's self contained, self calibrating and you just need a USB port. It's a...

Ok thanks! I had to do my measurements inside, pandemic no vax quarantine, I also had a tuff time finding a spot where I could get reliable repeatable measurements took me a couple of try's to get it...

Great! Looking forward to see what you get. What are your compression drivers??

Rob :)

Hello Scott

Your Welcome

Thank You for posting your measurements. You have the same on axis 3K peak I have in my measurements. I was wondering if it was me or real as in an on axis bump the...

Hello Ian

You didn't steal it I posted it. I don't have a problem with you building from it and suggesting changes. That's fine that is what this forum is about sharing where we can to help each...

If you are trying to do a 2450SL on the M2 it's no big deal. Keep in mind the 476Mg is a 16 ohm driver . I don't know what kind of crossover simulation software you have but this schematic should get...

Hello Steve



No I didn't see any reason to go that way. I have the aquaplas coated Mg which both sound and measure great. I would love to get a pair of diaphragm's but they are not available....

It should be fine. I am using 476Mg's on the M2 waveguide and 2453SL's on PTH1010's. Both had enough top end on either waveguide so you should be OK.

As far as a passive M2 I have an almost...

What do the ungated responses look like. If you gate @ 3.6 msec you don't have enough resolution to see what the actual roll-off looks like. You really need to be an octave below. When I did my...

Hello POS

No kidding! So when you put in the factory presets the stock system is flat on axis? I didn't know that good to know! Are you measuring of the logo axis or on the waveguide throat. I...

They look great! Enjoy them!

Rob:)

Great Idea! Looking at those I am so glad I playing with 2216's as opposed to those monsters! So is that a 2 man lift?!

Rob:)

Hello Flodstroem

They sure do look nice! That oil really brings out the grain!

Rob:)

They look great!

Rob:)

We all know just how good JBL Blue and Walnut can look!

Rob:)

They look great! Once you oil them up!!

Rob:)

Hello Pos

Will send you a PM in the mean time as another reference here is a 476Mg on the M2



Rob:)