Oh, I forgot to come share here... My new favorite thing. :D will eventually be tri-amping all three front horns, but for now they're working excellently with the stock crossover (not listening @...
Type: Posts; User: m8o; Keyword(s):
Oh, I forgot to come share here... My new favorite thing. :D will eventually be tri-amping all three front horns, but for now they're working excellently with the stock crossover (not listening @...
I've seen this item come and go a few times with noone bid on it. Whoever bid against me, at least say "thank you" to me for pointing it out to you. :banghead:
:o:
In the likely event the '?' means "what the heck are you talking about" ;) and not "I don't know", I mean one of these (it should have occurred to me to post a pick sooner):...
Just wondering if the extension of the throat the short 1/4"- 1/2" amount helps or hinders any part of the frequency range, and when the spacer may be needed? Are there particular horns that hit the...
...indeed... http://www.dcchomes.com/Fc260.html ; http://www.dcchomes.com/gregstractrixcalculator.html
It's no longer available, being replaced by the upcoming Blu-ray device. The Oppo model pages have a comparo link. (it's a very informative website). Here are [well, were] the differences:...
I see. What just came to mind is the VRX series does use 3 of them. So what both you say (about them not keeping up) and Zilch say (about knowing what to do with them) can be both be true at the...
I'm wondering a few things as I plan to be using them lower than I am now...
What lens/horn were they on, and what cross-over frequency and slope were they using at that time ?
Thanx
I'm such an amateur... :slink:
Lol... Much thanx. It's very good to know there's nothing wrong with the drivers in that case. :coolness:
I know i'm reviving a 'necro-thread'. But, for any wondering the same thing as the OP and as I was... for the record, I'm loving them on 2342 lenses. Presently using it as a tweeter replacing the...
having come to this thread only after this action, I'm intrigued to see the measurements!!! :D
To shift the discussion a bit. Timely that I see this thread as the most recently posted-to today realizing I've been stricken by this ailment this afternoon.
Today, I unpacked a whole bunch of...
Not that this thread really needs this (a lot of very well informed folks here), but some really good info & pertinent "rules of thumb" & formulas under here...
I'm building some side surrounds using the 2342 horn in a MTM config... maybe even MMTMM with smaller mid-bass drivers or FMTMF with the Full rangers pointing down @ near 90 degrees to the horn and...
Rob, a question about your radiation pattern rendering. This may be a silly question, but I'm hoping to confirm... that is the radiation pattern only over the few octaves that the high and low...
ah, I thought it was the 2417H that was needed (of that series), but it's the 2407H.
I'll look for all of those.
thanx very much,
-steve
I thought I'd give this thread its "annual bump" :p instead of starting a new one, as this thread's topic so perfectly covers many of my questions as well.
Intro:
I just bought a couple of...
That reminds me of the saying I heard was attributed to the M&K folks (I miss them) but who knows, it's probably much older, but ... "there are no grills like no grills". :applaud:
Otherwise,...
Thanx that annotated schematic; helps a lot.
I'm interested in trying the 70V tap to drive a single driver (no passive x-over) by a high impedance source. I'm looking to experiment with...
I don't mean to answer my own question and still hope to hear from others ... but looking up the tube data for the 6CA7 power tubes, I see it's capable of providing 35W for a pair in push-pull biased...
To Anyone in the know... Please tell me about the 1569A Amplifier. It seems to be a surprisingly high powered amplifier @ 80W per mono-block. It surely must run in Class B. Is this the case or...
Thanx for the info. That's very helpful.
I did not mean offense against 'live gear'. Just that I was always under the impression home-audio warrants and requires a much lower noise floor then...
Regarding another digital processor made for live sound that can serve as a digital x-over .... Does anyone have experience with the BSS processor? ...
Thanx. Noted. That's info is invaluable to know.
http://www.behringer.com/DCX2496/index.cfm?lang=ENG
http://www.parts-express.com/pe/pshowdetl.cfm?Partnumber=248-669
or am I mistaken and that has been out already, just delays in producing new...