It's sometimes referred to as "that baby poop" color brownish red. But is it still available anywhere? It appears to be "stretchey" and I would like to match my L112's that have perfect grills where...
Type: Posts; User: Desull; Keyword(s):
It's sometimes referred to as "that baby poop" color brownish red. But is it still available anywhere? It appears to be "stretchey" and I would like to match my L112's that have perfect grills where...
Thanks for responding. ... these I picked up some time ago and have been "working" (so called) on them for about 7-8 months. Basically they've just been sitting and never part of my system so I have...
Pretty much says it all. The driver seems to have normal excursion but if I push the cone inward it feels
"bottomed out." I havent opened it up, probably couldn't fix it anyway but wanted to....
Thanks David for your info and patience! Here's what I found after sitting down with the LF driver first and the schematic (which ties my brain in knots). Had to ditch the schematic and just visually...
Thanks, but yea, sufficiently confused. To revist, I used the JBL "as is" polarity as it existed with the L46. So, I reconnected the LF driver with the green/black going to the driver's positive...
This is related to a previous thread of mine, "L46 Polarity....Advice Needed." I have a 052ti driver I thought I would drop in the other speaker now that the refoam is done and the crossover has new...
VERY helpfull, thanks much! As an aside, how would one check the polarity on a tweeter if it couldn't be determined by the male/female connector as in the 034, or large male spade type post/small...
Thanks to you both for the info. I'm used to KLH and AR speakers so the polarity seemed counter intuitive.
I checked the Polarity Conventions JBL again for the driver number, 117H-1 but not there....
Thanks for the confirmation on the crossover. Yes, the male post on the 034 has next to it on the plastic frame the "+" but the yellow/blk stripe wire with the female connector is the negative on teh...
Well, I got done rebuilding the crossovers and I removed the 034 Tweeter to take a look - a gratuitous action on my part. I was ready to install the crossover back into the cab and had the schematic...
.....Also, many capacitor manufacturers make the same cap value with several voltage options. Usually the higher volt capacity (but the same uF) will also be larger and/or longer. I know SoniCaps are...
Carl's very approachable. Give him a call -- or email to have him detail out for you what's the proscess. He's done my KLH 5's and I have no complaints. You'll get a little surprise when you get the...
Sorry about the link, it doesn't seem to open to the schematic although it's correct. The schematic is able to be googled though. Could anyone confirm that the "leg" in question is a notch filter?...
http://www.audioheritage.org/vbullet...9&d=1163091639
I'll likely replace them all but I am trying in a very basic way to figure out what the L3 inductor and the the C5 14uF cap do in the curcuit. Is that "leg" in parallel with the tweeter and therefore...
Well, I'm fortunate enough to have "inherited" a nice pair of 46's. The woofer surrounds are shot but I'm good with replacing these. I cut my teeth on a set of L112's that turned out well. What I...
Thanks all for the good advice. True, wait and see how they sound and how they fit with my gear first. Good to know, too, that the 044 isnt a "plug-'n-play" option. 033 may be. Crossovers would be in...
Having a pair of these on the way I am curious about upgrading the tweeters to enable higher frquency capability. I do have a pair of 035 ti's i believe they are, and have the mechanical ability to...