Turner, Hi
The horns are approximately 70 cm from the back wall and about 55 cm from the side walls, they seem to have a sweet spot which is bets found by experimentation where they engage with...
Type: Posts; User: IWC Doppel; Keyword(s):
Turner, Hi
The horns are approximately 70 cm from the back wall and about 55 cm from the side walls, they seem to have a sweet spot which is bets found by experimentation where they engage with...
Turner,
Thanks, this suggests that I can match the power of my horns with 36W of amplification and hence 500W into 4 Ohms, I think this is 300W or so into 8 Ohms, should be adequate.
Looking at the specs and comparing to my horns, they are circa 105db/W at 1m, but with my settings I suspect nearer 102-3 db/W, my 211 is if a 18W I had thought it was 11W but checking its nearer 20W...
I can also consider 2245's as well at a later stage.
Here's my plan....
Two 4645c's used with two of these BK plate amp http://www.bkelec.com/Modules/bsbpv500.htm. I think this will be a good start as this is class AB and I can experiment with some...
I have pretty much decided to use tow 4645c's with my horns from 22-100 Hz, these use 2242's, interested in any comparisons to 2245's of old, they seem a better option to the 2241's ?
Interesting and thanks for all the inputs so far.
I am moving towards stereo bass using either crown or Marchand or possibly BK Electric amplification (something that has all I need in one box to...
The specs are interesting the 5749 goes lower at -3db (30Hz) than the 4645 and 4642 (35Hz), but less at -10db (25Hz vs 22Hz). This is without EQ, I would be interested in comments about the character...
Thanks guys.
I will be using this is a modest size room for music, not film (I have a separate system for film). The room is currently 15.5' by 28' (two room knocked through) 10' ceilings, suspect...
Hi all, this is a repeat (sorry) of my post in the amplification section, it might sit better here
I am very interested in researching the best solution for my 2 channel system to fill in the...
Hi all,
I am very interested in researching the best solution for my 2 channel system to fill in the bottom end. I have a pair of Living voice Tone Scouts that are all over by 50Hz, sound...