Search:

Thanks , It is Giant and heavy but the top hood can be removed as well as the baffle side extensions , then it is manageable incase I need to move them,

Hello Francis, The 604 sounds full enough on it's own and covers the full range , the horn just add the mid sound only a big horn can produce. The horn is 270Hz Modified Iwatta from Le cleach...

Goliath Horn cabinet for Altec 604 HPLN used as woofer and tweeter and separate midrange. I originally made the bass horn for 18 inch but this 16 inch altec is a wonderfull sound in it too. I cross...

Driver picture, I don't know, maybe somone know's if this is how the cones are identified , looks real to me

Hi Lee, Horn is 11 ft on center of the horn path,
Oh and pretty sure they are genuine JBL cone I got them at the JBL dealer in sealed JBL boxes and put them in myself so no mix up i'm sure, but...

Hi Lee, thanks for interst, I have a preliminay drawing that my freind Dieter made of it but it is not competely dimentioned , I could get him to finish the dimentions as they are now. It was one of...

Sorry for late post to this thread , I didn't want to make one more 10cuft box. I thought of trying the 2245 in a horn again, this time rear loaded,I read on other threads that it was probably not a...

I have made several of the modified iwata 270 hz 400hz 600hz and 800hz all test very well and have the best home use sound stage coverage I have heard as well, I have to agree with the coments. My...

Here is Look see of this Lovely Piece, A living room sized Split A210 that was chopped down to the correct height for living room listening. I have been after that elusive live horn sound for ages...

Thanks Widget, I ordered the book.
Andrew

Thanks Jim, I should also ask you on your Iconic line is there a "New" 416 8b available? with the same spec as the original?
Thanks Andrew

Thanks for the info, so when I set the clio up the auto delay is adjusting the time of measurment,correct?
Andrew

Thanks for the link I found it interesting that he spreads the high pass and low pass 20,30% I found the same with the BMS, I used 12db @500hz linkwitz on the bass, and 800hz, 6db slope with 20db...

Thanks Mr Widget.
Yes the mic is only measuring one point in space, and I have swept through these ranges with a sine generator and I can't notice any dip by ear. so I wasn't too concerned. But it...

Thanks guys:bouncy: I would like to try some other drivers for sure. I have a file with a direct comparison to the "lengend" that I will post as this is not a "K" site, right?? I don't mean to...

Thanks Todalin, sorry for the placement. just looking for a Urei 15" or JBL coaxial for compare, LONG LIVE JBL.
Andrew

BMS 4590 test, this is with pasive crossover and attenuation to match A210 Chopped and Split mid bass with 416 8b.

More Bentwood ,JBL Driven, 2245h in the Fatman, 2482 on the Bentwood 200hz ,altec 4168b in my chopped split A210 and small masher 2410. JBL DSC 260 active X over Timed and Power to spare.SOOO SWEET...

Horn pics

I have had a BMS 15c682 Coaxial in my rear loaded horn and still looking to try a Urei coaxial. The BMS 4590 coaxial which I have, and tested on my 200Hz Bentwood horn is sweet no question. I have...

I have had some BMS 15c682 15inch coaxial in my rear loaded corner horn. I don't want to offend the lansing guys so I will say no more.
I want to get some 4592 nd to try on My Bentwood 200hz horn....

More Tests, also for comparison is a test of the same driver in a 7 CU ft Ported box in last post.
I wish JBL still made a 15in monitor:blink:
Andrew

Thanks Jbl Guy for starting this thread. I guess it's time to add the test results for this "Angel" as paragon and my wife call it. Sorry JBLGuy for the late responce but better late than never...

So here are some of the response curves to show the diference on the cabinets that were made .The Tribute Vs the Fatman.
Andrew

I have some 2245h as well with separated voice coils, is there a good aftermarket kit avaiable?
Andrew