Search:

The best I can do, until the next time I open one up, is to try and upload a larger image of the 120v unit I used to model what I changed in the 240v unit.

Thanks for the advice. Turns out it is just a tight fit over a splined shaft. Took a lot of pulling. I was only concerned because the Pro-Control Four has an LED built into the knob which, in...

Shot in the dark: Anyone here had experience removing the volume knob from a Pro Control Four? Not sure there's any way to clean the pot but one of mine is having an intermittent problem with...

That seller is an A-hole! Plus he's asking more for a non-working unit than I paid for one that works but just won't power-up the switched outlet. I'm going under the assumption that the relay has to...

Actually, it shows a Control Three-17 as the pre-amp.

Soundcraftsmen's nomenclature is pretty simple: These are the same as the Pro Control Three and Pro Power Four except they don't have 19-inch...

The tone generators simply supply the sound. You need measurement devices to tell you the relative level at several/many points along the frequency spectrum. I did it with a Rat Shack dB meter but...

I'm sure a Google search will turn up plenty of them: http://onlinetonegenerator.com/

I used a machine: http://www.neutrik.co.uk/en-uk/audio/test-and-measurement/dr2

I bought my PE2217 new . . . a long time ago. It came with the record, which I still have. I don't think any of the Pro series came with a record. We have tone generators on-line now.

BTW, I...

Anyone want to snag this deal?

You can send it to me and I'll pay you for your trouble, or keep it for yourself. It's a great deal.



http://jerseyshore.craigslist.org/ele/3830121496.html
...

It matches the Pro-Control-Four: 2RU

http://www.audioheritage.org/vbulletin/showthread.php?28488-EQ-Unity-Gain&p=286989&viewfull=1#post286989

Pro-EQ 44 is 21 band per channel. 21 + 21 + 2 zero-gain controls = 44 slide pots. Range is 15dB±. The slides are very smooth and free of the stiction of older SC EQs. None of the rectangular knobs,...

I posted scans of the Pro-Control manual in your thread over at AK.

I'm pretty sure I have the original manual, but I have two of the original units, too, so I can only offer a copy. I don't recall there being that much information in the small manual, however.
I...

AFAIK, Soundcraftsmen never made an "amp" with a graphic EQ. They were famous for their pre-amps with built-in EQ and, in later years, they even had power-amps with LED signal-strength arrays, but...

Yes sir!

56940

http://i1110.photobucket.com/albums/h441/GaleStorm118/sept/Soundcraftsman EQ/IMG_0341.jpg

Nothing wrong with posting items for sale. For your benefit and ours they should just be in the Marketplace section where we'll look for them and you'll get more response.

I'd love to have two,...

I think you really need to put this in a Marketplace post. :dont-know:

I'm not being bitchy, you'd probably attract more attention to your sale that way since, well, you are just selling, aren't...

In the beginning of this thread (maybe?) I mentioned I've owned SC gear for something like 35 years (currently a dozen-or-more pieces). I am, however, a short-time user of their amps, having owned...

A graph that came with the DC300A-II (the amp I'm now using with the 4345s) owner's manual shows a damping factor in excess of 1,000 in the range in which the 2245 operates. I suspect it is similar...

FWIW: Nearly all of my later Soundcraftsmen units are labeled 220/240v and yet they all are running on 110v. One of my DX4200s has two 220v stickers on the back and one has none. Both have the...

Obviously the Pro-Reference Two uses the same front panel as the Pro-Power Four but other than no fan on the Reference, how do they differ?

Love the Pro-Control Four. My favorite pre-amp!...

http://audioheritage.org/vbulletin/showthread.php?t=817

Welcome, and thanks for the information.

I hope you'll hang around in case I need your help in the future! ;)

Soundcraftsmen PE2217 (since new), DX4200 (2), Pro-Control Four (2), Pro-Tuner...

Priced a new D75A recently?

034? :dont-know
Or if he was practicing his carpentry skills, maybe the 044? He doesn't specify whether it was phenolic or titanium, that I'm aware.