Search:

Thanks folks...

Re cones... took the woofer in need of a new surround to Speakershop in Toronto. Decided to recone the driver. I will compare to the other when I get it back and may recone the...

I have one, use it regularly, and love it. I use it between a Bryston BHA-1 doing preamp duties and a 3B SST via balanced interconnects. I operate it in the 6db range. I used REW for a while....

Hi all, I had the good fortune of getting my hands on a pair of 4430s recently, and I want to restore their appearance and performance as best I can. I’ve read many of the threads on this board, but...

Hi Folks. It's been a few years since I acquired the parts for my next speaker, but still have not started the cabinets.

Anyway, along come a pair of LX13s. The cost of the parts to build the...

EDIT: I used the wrong value. Looks like it should be .02mh. Ignore blue line and question. thx.


With the exception of the coils, I found the exact value components of the high pass filter in...

How about Cap ratings, Solen offers 250V, 400v and 630v. I usually use the 250v, but I'm thinking 400v for this application.

Is 400v enough for the lo pass section given the woofer can take...

Not sure if I'm reading this correctly. Does R6 represent the driver? Or is that a real resistor?

Also, are 10 watt resistors suitable for application? Or should I double the value and run two in...

Thanks 4313B, that's what I meant.

I think I'm going to use the N4671 lo pass filter as I'm using the 2035HPL which doesn't seem to need the zobel. I measured the imp of mine a while back and...

Wow! Just what I was looking for! Thanks!

One Q. How much impact will the ab switch have on the top end? Can you add to the chart?

Thanks, Microsoft Visio

I think I'm done with the enclosure design. Here are the dimensions in case anyone is interested.

I have a bathroom reno to finish first. I hope to start in July or Aug. I'll posts pics as I...

Would using 4 aircore inductors (2.47; 0.30; 0.20; 0.33) in series be a bad idea?

Thanks Scottie! The blue trace looks much closer to the 2405 graphs. It sounds much better too. I'll have to follow up with the vendor to see what this is all about. I would not have imagined...

Has anyone reworked the 3110a to have a fixed HF gain of -10db and not use L3 and S2?

Thanks folks, I want to try removing/cleaning installing again.

Mike F, thanks for the offer, I'll get back to you on that.

Does anyone know which curve more closely resembles the...

I still can't decide if I want the tweeter in or out of the cabinet. I guess I sold too many of the Radio Shack super tweeters back then.

Keeping the tweeter out reduces the bulk of the box, but...

Here's the picture I couldn't post last night.
55970

Hi all, great site. I've been reading for months.

It's been over thirty years since i first built a pair of 4560 bass horns with the matching 12" mid cabinets. In the 70s and 80s I used them for...

I'm going to try the high shelf on the 2445/2380 before dropping $150+ each for the JBL diaphrgms.

Aftermarket, about $30ea. Thought I would try them, given the cost of the jbl parts.

Actually, the blue line sounds good. Sounds like a crossover is installed when it isn't.

I purchased a pair of 2405H that arrived in bad shape. So I sanded them down and repainted, now they look great!

Then I ordered and installed replacement diaphragms. Here comes the problem... ...