Search:

Great Zilch.
Ton of info in the link. I've started perusing it.
Thanks!

I was looking over the mod 19 crossover (n1201-8a) and it seems that c4 (6uf cap) is allowing higher frequencies to pass unattenuated so that the mid frequencies can be attenuated by R3. If this is...

I enjoyed meeting Widget and others in the Design Interaction room!
I liked the 1400 Arrays, IMO they reminded me of the Altec live sound. The Revels for me were a fine example of the studio monitor...

Well...we can see better with one headlight...than none at all!:)

...good ad! :) ....must of been in PlayBoy?

I looked into the horns on my 19s with a flash light and can see the tangerine phase plugs. I think I read once that if you are not using the phase plugs then you should try connecting your speakers...

I would agree. There should be ample room on the bottom stands. And even though you still have to stoop down to connect speaker wires, at least you won't have to set the 19's on their sides to...

There are many that feel that a properly working model 19 is a very well balanced speaker and needs no additional HF drivers. However , if your model 19 seems lacking in the High Frequency range, you...

Here are a few pics from the "Altec Users Board" under Altec 19 thread.

1) Model 19 crossover board with 4 ground lugs that are rivited to the board. (highlighted in green)
2) Model 19 crossover...

...since you're an owner of model 19s, you might want to check out the comments on the Altec User Board if you haven't already. I just posted the same info over there as well. Some interesting...

TnTn-

I haven't tried the new capacitors since making the new ground connection. Infact I didn't even measure the resistance between the lug and the crossover board. Initially , when I saw...

LOL....semi is right. Only a few things here and there!


BTW...also had an amp. go bad in storage. Don't know why, it was working fine before putting it away for a number of years. Took it out...

Almost 30 years ago I somehow convinced my wife to turn the main volume control to zero before switching or turning on or off any equipment. The main amp was always turned off last.
(ditto for our...

Hello to all. I've been visiting this forum for the past six months and have found some very useful information. So, when I discovered something concerning my Altec 19's this evening, I decided to...